MMU3 Core One Top Acrylic Panel PTFE Filament Passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows PTFE tube from MMU3 to passthrough the top acrylic panel into the Core One enclosure
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 853
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This model allows the Core One Top panel to remain in place while using the MMU3 mounted to the back of the printer. Mounting brackets for the MMU like in the images can be printed from here: https://www.printables.com/model/1322186-core-one-mmu3-mounting-brackets-compatible-with-to. Follow the instructions from Prusa to modify your nextruder for MMU3 compatibility https://help.prusa3d.com/guide/9d-core-one-nextruder-mod_111779
In order to prevent kinking of the bowden cable, the entry point has to come from the right and enter the Core One enclosure as close as possible to the pivot point of the swing arm. I used a PTFE tube for the XL and cut it to length (see parts list below) to be able to reach all the way from the MMU to the nextruder.
I also am providing a drill template. I know it’s scary to drill into the acrylic, cause once you do, there’s no going back. ;-) I highly recommend putting masking tape on both sides of the acrylic while drilling to prevent any unnecessary scratches. Please confirm the orientation of the drill plate as the top panel only fits on the enclosure one way. You'll use a 5/16" (8mm) drill bit for the main PTFE hole and a 9/64" (3.5mm) for the mounting holes.
Don't forget to set the length of your bowden cable under Settings>Hardware>MMU. My length was 850mm from the MMU to the Nextruder.
You’ll need the following hardware for completion:
- 4 x M3 heat insert nuts https://a.co/d/fhLJA33
- 4 x M3x8 screws https://a.co/d/1gTbWAh
- 1 x PC4-M10 fitting https://a.co/d/1OL3waR
- 1 x 4x2.5x1275mm PTFE tube https://www.prusa3d.com/product/ptfe-tube-4x2-5x1275-mm
Enjoy, and let me know if you have any feedback!