Transparent Badge Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This keeps badges from getting scratches. Badge-holder available from link in description. Looks much worse in picture.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Badgeholder: https://www.printables.com/model/42136-id-card-badgeholder-supportless
Example Picture was printed with the recommended 2 layers. This is successful with 1 to 5 layers, loosing clarity with each added layer. Camera adds significant glare.
For best transparency, settings should be set to aligned rectilinear where the infill pattern runs in the same direction.
I made this for transparent PETG.
My settings:
Nozzle: 240C
Bed: 85C
Extrusion Multiplier: 1.02
No Cooling
60mm/s max speed, the lower the better until you hit around 15 to 25mm/s depending on the material
1 Perimeter
This model can be lessened to 1 layer or extended to at least 5 layers and fit the badgeholder with a badge inside it. At 5 layers the badge is still visible but the protector is clearly noticeable. At 1 layer there is enough room for it to potentially slip out.