1 / 14
IKEA Skadis Filament bag Vacuum Pump holding clamp (50mm Diameter) — zdjęcie 1
1 / 14

IKEA Skadis Filament bag Vacuum Pump holding clamp (50mm Diameter)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament Vacuum sealer holder compatible with IKEA Skadis boards. Easy to install or remove with a pinch!

Ocena
0 / 5
Polubienia
4
Pobrania
9
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Use this to mount your electric vacuum seal bag pump for storing your filament as dry as possible - Directly to your IKEA Skadis board! Or hold any round object that's ~50mm in diameter. Store your filament as dry as possible for school projects!

Bag pump purchased from Aliexpress. Brand name “Two Tree's” https://www.aliexpress.us/item/3256806311721624.html

Print material: PETG Translucent Green

Recommended print settings: 6 perimeter walls, 3 top layers, 3 bottom layers, 20% Archimedean Chords infill. You want this print to be someone flexible with PETG.

To install or remove the vacuum pump holder in an IKEA Skadis pegboard, press the clamp ends together, and then tilt it up or down to pop it in or out! Please keep top side facing up! See pictures to identify top facing side.

Tagi