GT3 RS shelf

• The size is just right for a print bed of about 220x220 mm (I have Genius Artillery printer).

• I recommend adding modifiers with denser infill in the slicer to strengthen the mounting points.
  The main body uses 20% infill, while the modifiers use 30% infill, or more. 

• You can use some MDF board 600x200 or 800x200mm for shelf itself. (e.g. IKEA BURHULT, TRANHULT… ). Feel free to use any different you want.

• GT3RS logo sign is white-sprayed and glued to the side wings.

• Mounting holes are Ø=6mm (wall) and Ø=4.5mm (shelf).  

• Countersunk head screws needed: 

  • 4 bigger wood screws into wall -  5x60-80mm

  • 6 screws to mount both side wings - 4-4.5x30mm

  • 4 screws to mount shelf to the consoles - 4-4.5x20mm

  • TIP: Use black screws for a better final look. I didn’t have any black ones in the proper size.
     

• NOTICE: print is long due to its size, please be patient. Every part took several hours.

☕ I hope you enjoy it. If you like my work, you can support me via Ko-Fi https://ko-fi.com/matus15  ❤