ChiliPAD or OOLER Drain Tool for CPC Quick Disconnect DPC Series couplings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw they sell replacements for $5 and I almost threw mine away when I opened my OOLER, so I figured I'd model this…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I saw they sell replacements for $5 and I almost threw mine away when I opened my OOLER, so I figured I'd model this up in case anyone needs a replacement.
The bridges are short and the inside has a chamfer so this will print fine without supports. I'm including one that is closer to the original, but will need supports on a FDM printer.
From my research I believe these connections are "CPC Quick Disconnect DPC Series couplings" so this should work with anything else that uses them.
I made a stand for the OOLER here: https://www.thingiverse.com/thing:4634285
I also made a funnel for filling your OOLER here: https://www.thingiverse.com/thing:4630013
Print Settings
Rafts:
No
Supports:
No
Infill:
25%
Notes:
The walls are 1mm and 1.5mm so I recommend printing with a line width of .5mm which you can easily do with a normal .4mm nozzle.
Category: Replacement Parts