ChiliPAD or OOLER Drain Tool for CPC Quick Disconnect DPC Series couplings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I saw they sell replacements for $5 and I almost threw mine away when I opened my OOLER, so I figured I'd model this…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I saw they sell replacements for $5 and I almost threw mine away when I opened my OOLER, so I figured I'd model this up in case anyone needs a replacement.
The bridges are short and the inside has a chamfer so this will print fine without supports. I'm including one that is closer to the original, but will need supports on a FDM printer.
From my research I believe these connections are "CPC Quick Disconnect DPC Series couplings" so this should work with anything else that uses them.
I made a stand for the OOLER here: https://www.thingiverse.com/thing:4634285
I also made a funnel for filling your OOLER here: https://www.thingiverse.com/thing:4630013
Print Settings
Rafts:
No
Supports:
No
Infill:
25%
Notes:
The walls are 1mm and 1.5mm so I recommend printing with a line width of .5mm which you can easily do with a normal .4mm nozzle.
Category: Replacement Parts