CatEye ViZ Rear Rack Bracket (19mm vertical mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick-release rack mount for CatEye ViZ bicycle rear lights. Designed for 19mm vertical hole mount.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Simple mount for the CatEye ViZ series of lights (tested with my ViZ450). Should be compatible with other CatEye lights (Reflex Auto, Tight Kinetic, Nano). Mounts to my Axiom Streamliner DLX rear rack, which has vertical holes 19mm apart.
Designed with a little flex tab to allow for quick insertion/removal. Mounts using two M5 nylock nuts embedded into the print, and two M5x8mm button head scews. Screws and nuts both point towards the rear. You can also get away with just a single screw.
I've printed mine in PETG-CF, but I've printed similar brackets in the past in PLA+ and those brackets have lasted 2 years without any issue. Mine printed very tight and required the light to be shoved in firmly the first few times, but YMMV
SolidWorks part and STEP file attached for your convenience.