Bike Handlebar Light-Box Duo + Mount (with Matching Keychains)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two handlebar light boxes with a printable clamp mount, plus matching keychains. Fast prints, bright, fun.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bring your bars to life! This set includes two mini light boxes for the handlebar and two matching keychains—perfect for night rides, photos, and good vibes. Faces are themed (“PEDAL TO THE METAL (but gently)” and “POWERED BY COFFEE”) and you can swap them or remix your own.
What you get
2× light-box shells with rounded edges
2× face plates (uses 4 colors)
2x matching keychains
Printable mount
Why it’s cool
Lightweight, compact, and swappable faces
Looks great unlit or back-lit with a tiny LED strip
Print-friendly geometry (no fiddly supports)
Mount is solid and easy to strap or screw on
Printing
Material: PETG (best outdoors), ASA/ABS (heat/UV), PLA+ for indoors
Nozzle: 0.4 mm Layer: 0.20 mm (0.16 mm for crisp text)
Walls: 3–4 Top/Bottom: 5–6 Infill: 15–30%
Supports: Off (faces up). If needed, supports touching buildplate for the back cover only.
Shell: standing on its back.
Face plate: face up.
Diffuser: flat.
Color: AMS/MMU friendly
Keychains print face up; add a 0.6–0.8 mm color layer for pop.
Optional electronics (back-lit mode)
LED: short 5 V strip (WS2812B/NeoPixel, 8–14 LEDs) or a tiny LED panel
Power: USB power bank (5 V)
Controller: simple on/off, or ESP32 for animations
Weatherproofing: light bead of silicone inside; keep the drain hole down
Mounting
Fasten with 2× M3x16 and nuts or two zip-ties through the channels
Angle the box slightly down to avoid glare
Safety & legality
Use white/amber forward, red rear (common road rules)
Avoid aggressive strobes in traffic; keep brightness reasonable
Check bar/fender clearance and re-tighten after first ride
Remix & customization
Share your remixes/makes; I’d love to see your setups!
Usage & Links
Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon
Portfolio at https://marjers.com/
Tools I use:
Acrylic paint pens for painted models, blade cutters for filament cutting, and a sander for, well, sanding.
Amazon Acrylic Pens (https://amzn.to/4wc326I)
Amazon Acrylic Pens (https://amzn.to/4eGZWAv)
Amazon Blade (https://amzn.to/4gII4YH)
Amazon Sander (https://amzn.to/4eC5xIg)
