Dummy Flash Shoe for Godox AD100Pro and Leofoto FA-09
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dummy Flash Shoe FlashShoe for Godox AD100Pro
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Some Explanations:
Surely the Godox AD100pro comes with a quite usable fastening and so there is firstly no need for a 3D Printed part.
But in my case i needed a minimised distance between a small "ball head" (in this case the LeoFoto FA-09 and the Godox Flash).
Now this 3D-part comes into play.
Additionally you might need these screws for connectin it to the flash:
https://www.ebay.de/itm/156443750034?var=457543786364
Printed on a Bamulab P1S with Sunlu PLA+ 2.0
Disclaimer
All my projects are in a stage of prototype. I refuse any liability for damage of the printed part or your equipment or injury/infringement.
By downloading it, you print and use it at your own risk
https://www.cazul.de/impressum