1 / 1
Dummy Flash Shoe for Godox AD100Pro and Leofoto FA-09 — image 1

Dummy Flash Shoe for Godox AD100Pro and Leofoto FA-09

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dummy Flash Shoe FlashShoe for Godox AD100Pro

Rating
0 / 5
Likes
2
Downloads
6
Makes
0
Views
69
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Some Explanations:

Surely the Godox AD100pro comes with a quite usable fastening and so there is firstly no need for a 3D Printed part.
But in my case i needed a minimised distance between a small "ball head" (in this case the LeoFoto FA-09 and the Godox Flash).
Now this 3D-part comes into play.
Additionally you might need these screws for connectin it to the flash:
https://www.ebay.de/itm/156443750034?var=457543786364
 

Printed on a Bamulab P1S with Sunlu PLA+ 2.0

 

 

Disclaimer
All my projects are in a stage of prototype. I refuse any liability for damage of the printed part or your equipment or injury/infringement. 
By downloading it, you print and use it at your own risk

https://www.cazul.de/impressum