MODED XOL toohead (CPAP version ) hotend mount for Microswiss flowtech (Bambu Lab ),RGB neopixel ,Orbiter mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
XOL toohead (CPAP version ) hotend mount for Microswiss flowtech plus nozzle neopixel mod
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please read the complete Description:
Moded hotend mount for the Xol toolhead CPAP version optimized for the Microswiss Flowtech hotend (Bambu Lab drop in replacement ) plus i changed the nozzle leds from the sequins to RGB neopixels (they are easier to solder less fiddily etc.. )
Also there is a slit on the back side for the thermistor and heater cartridge cables to pass.This enables a smoother transition for the cables reducing the risk for breaking a cable ( the Microswiss hotend is quite pricey ).
Print Settings:
V2 now available with print in place support as a single file
A brim may help.
HARDWARE:
Hotend mount hardware:
2X M3 Nylon lock nuts
2X M3X25 Caphead screws
Hotend fan :
2 or more M2.5 heated inserts
2 or more M2.5X15 screws
CPAP duct :
8 M2X10 self tapping screws