MODED XOL toohead (CPAP version ) hotend mount for Microswiss flowtech (Bambu Lab ),RGB neopixel ,Orbiter mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
XOL toohead (CPAP version ) hotend mount for Microswiss flowtech plus nozzle neopixel mod
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Please read the complete Description:
Moded hotend mount for the Xol toolhead CPAP version optimized for the Microswiss Flowtech hotend (Bambu Lab drop in replacement ) plus i changed the nozzle leds from the sequins to RGB neopixels (they are easier to solder less fiddily etc.. )
Also there is a slit on the back side for the thermistor and heater cartridge cables to pass.This enables a smoother transition for the cables reducing the risk for breaking a cable ( the Microswiss hotend is quite pricey ).
Print Settings:
V2 now available with print in place support as a single file
A brim may help.
HARDWARE:
Hotend mount hardware:
2X M3 Nylon lock nuts
2X M3X25 Caphead screws
Hotend fan :
2 or more M2.5 heated inserts
2 or more M2.5X15 screws
CPAP duct :
8 M2X10 self tapping screws