Wire Clips for SV08 2020 Extrusion

Wire Clips for the SV08 2020 Profile

###### Please post your Makes ######
Please like this, download and post the make if you built it
It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward

Feel free to help my projects continue https://ko-fi.com/gcodegearhead 

###########################################################################
# Intro
###########################################################################

The standard 2020 extrusion clips were too loose on the SV08 profiles. Seems like Sovol use a slightly different design. 
I designed these clips to fit nice and snug into the profile, this means they stay in place and have more than enough space for wiring. 

You can pair it with my Park Blob Poop for the SV08
https://www.printables.com/model/1328600-park-blob-poop-sv08-pbp-sv08 

###########################################################################
# Assembly Instructions
###########################################################################

Slide the wires into the channel, squeeze clip together while pressing into the aluminum profile. 

There are 3 types and associated type with holes in. 
You can also scale in the one direction for custom lengths.
Comment or DM for more variants. 

• 10mm with and without side hole
• 20mmwith and without side hole
• 30mm

Note 1: These are a tight fit, if it is too much for you use the clips with the side wire hole, they are less stiff. 
Note 2: Make sure a cable has not slipped between the two edges that insert into the 2020 profile.  

###########################################################################
# Print Settings
###########################################################################

Print this in PETG. You want flex.

• Layer height 0.2 or above 
• Line widths 0.4, force this to speed up printing. (Its designed to print with 0.4)
• 3 walls (if you have more its ok, will only do 3 by design)