RockNRoll for Voron Trident
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod allowing you to safely rock your Voron Trident on its back for access to electronics compartment
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Mod allowing you to safely rock your Voron Trident on its back for access to electronics compartment
Original RockNRoll mod for V2.4 has been around for some time, but unfortunately its not very usable for Trident - because unlike V2.4, Trident is very top heavy and would flip. This version changes the parts shape and adds top rockers/braces, which your printer rests on.
Made intentionaly tall enough to clear the Nevermore StealthMax (S)
Only left parts are included. To make it complete, mirror the parts and print also right side.
Just like original, you will need 2 heat set inserts (Voron standard size) and 2x M3x12 screws to connect bottom braces with bottom rockers, plus 6x M5x10 + roll-in nuts and 2x M3x20 + T-nuts to mount on your printer.