1 / 4
X-Shot Motorized Piston Pump Barrel Shroud (DMR)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enter your DMR arc with this over 10-INCH long DMR-inspired barrel shroud!
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 1186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (58)Powiązane
This DMR inspired barrel is a total of 10 INCHES long and comes with a full picatinny rail on the top. It's a friction fit just like the other shrouds and doesn't require tape. I would recommend printing it at an angle (as shown in the pic) and with supports. I would also use a Longshot barrel to give it more length, but if you can't use one, then the stock barrel will work, but it may look a little funky.