Ninja Blender Cup Mount Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the Ninja Blender cups to be stored under cabinets.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I had an idea to store my ninja blender cups beneath my kitchen cabinets that made good use of the rotational locking mechanism already on the cups.
Based on the Ninja BN Series 30 blender cups.
Compatible with: BN300, BN300C, BN300WM, BN300WMC, BN301, BN301C, BN302QAQ, BN302QCN, BN302QCP, BN302QNV, BN302QRD, BN302QS, BN305CCO
The rotating locking mechanism can be a bit tight to snap in place by hand, especially if you have residual supports in the overhang portions. However, once mounted, after a few cycles, you should feel it begin to loosen up and become a bit easier to install/remove.
I made it deep enough to store the cup with the blender lid with the cup also.
I recommend using a screw length that is shorter than the thickness of the wood shelf of your cabinet if you plan to mount it that way.
I used four #8 - ½" wood screws to mount it. I recommend printing with snug supports.
Open to feedback!