Water Tile Hexes (1 and 2 Hex) For Gloomhaven
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These water tiles are cut into hexagons and sized for Gloomhaven. Printing them on their edge provides the most detail…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 323
- Wydruki
- 4
- Wyświetlenia
- 1219
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
These water tiles are cut into hexagons and sized for Gloomhaven. Printing them on their edge provides the most detail to the surface, It is recommended to print with a brim but can possibly be fine without one.
A 1 and a 2 hex tile can be combined to make a 3 hex tile so I have opted to only use 1 and 2 for a mix of usability and printability.
A full set for Gloomhaven gives you 30 total tiles of water but the max used in the scenario book is 24. I use 14x 1 Hex and 8x 2 Hex to make 30 but you can probably get away with 8x 1 Hex and 8x 2 Hex.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
15%
Filament: Esun PLA Blue
Notes:
Printed with brim
Category: 3D Printing