Triple fan shroud for Asrock RX 7900XTX Phantom Gaming
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was annoyed at the loud stock fans so I made this.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Takes 2 120mm fans and a single 80mm fan all 25mm thickness.
Sounds way more bearable now at 100% fan speed and i get -5 degrees less on the hotspot.
I used 2200RPM fans to better match the old fans.
Link to the fan adapter: https://a.aliexpress.com/_msOxXWZ
Mount the fans to the bracket using self-tapping screws that come with most case fans,
then secure the bracket to the heatsink using the 6 original screws from the stock shroud;
and finally snap over the shroud cover on both sides making sure you align all the pins into the holes of the fans.
There is a space to store the excess cables at the end of the shroud.
Both halves of the bracket are identical so you can print whichever.
Use PETG or better for hear resistance,
Use inside brim for the bracket and outside brim for the shroud.