Parasol stand / umbrella base / Sonnenschirmständer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for a umbrella base
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Disclaimer: This is a design that is currently under evaluation - it needs to be checked how much water is diffusing into the inner cavity - since i leave those stand normaly outside in the winter it could be that the water turns into ice - an this could lead to da crack in the pipe for the stand - thats why i would recommend to store the stands in a warm place (above 0°C) so that ice could not occur. Alternatively you could modify the design to leave the insert open at the bottom so that there is no inner cavity left.
For my umbrella base which has a pipe diameter of 57mm I needed an insert for an sunshade which has a diameter of 37.
Printed in TPU - Perimeter is 2 Infill is 15%
When you print it dont forget to flip the model by 180° so that the part with the biggest diameter is is positioned at the print plate
Autodesk fusion file is included in case you need to modify it.
Dont forget to leave a like.