Lid Prop - K1/K1C/K1 Max

Lid Prop - K1/K1C/K1 Max

I designed this as a lite alternative to the K1 Series risers out there. Many of them require long print times and a lot of filament. Not to mention the hardware requirements and complicated assembly. This model uses only 55 grams of filament and requires just a couple simple steps to assemble and install.

☑ No hardware required.

☑ Only 55 grams of filament.

☑ Easy to assemble and install.

PLA needs to be printed with the top and/or doors open on the enclosure to ensure proper cooling and get the best quality. This device allows you to always have your lid open so you don't have to leave the door hanging wide open while printing PLA. Also, it makes it much easier to swap out the filament!

👉 Don't forget to like and follow! 

This set works with all models in the K1 Series. It can print on just one build plate in under 2 hours. Each part is labeled for easy assembly and the parts fit together such that everything is guaranteed to be lined up properly.

The clip on this device fits neatly over the lip of your K1 printer. The weight of the lid helps to keep the device secure. Once correctly in place, this device can withstand even the most intense of shaking/vibrations.

☑ Give your toolhead more space.

☑ Keep your chamber cool for PLA printing.

☑ Change filament with ease.

IMORTANT: Always use BOTH SIDES of the prop set while printing. Using one by itself will not be stable.
 

Recommended Settings:

Printing:

Optionally use glue on the build plate to prevent the tall structure from tipping.

Support:

Support the inset area where the parts where join together.

Assembly and Installation:

See the assembly and installation GIFs in the listing photos.

Commercial Use:

This model is for PERSONAL USE ONLY.

💲💲💲

If you would like permission to SELL THIS MODEL please subscribe to my Patreon here: https://patreon.com/davidsitgarage

Happy Printing!