Philips Hue dimmer adapter for Busch Jaeger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter from a Busch Jaeger wall switch to 3 Philips Hue dimmers. You can use double-sided tape to put it…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter from a Busch Jaeger wall switch to 3 Philips Hue dimmers.
You can use double-sided tape to put it on the wall switch.
There are magnets (2 per dimmer) at the back of the adapter. I have used Neodymium magnet 10x2mm.
This is placed on a Busch Jager with 2 parts, 1 big switch and 2 small switches. You can still access the switch (on/off) if you remove the dimmer.
I was too late to make a picture of the switch. I added a picture of about the same switch but with missing 2 small switches on the right.
I should have used RAL1013 for matching color with the switch (plate).
edit: added an adapter for 1 switch. Now printed in RAL1013.
Print Settings
Printer:
P3STEEL
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
PolyMaker PETG
Category: Electronics