Philips Hue dimmer adapter for Busch Jaeger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter from a Busch Jaeger wall switch to 3 Philips Hue dimmers. You can use double-sided tape to put it…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter from a Busch Jaeger wall switch to 3 Philips Hue dimmers.
You can use double-sided tape to put it on the wall switch.
There are magnets (2 per dimmer) at the back of the adapter. I have used Neodymium magnet 10x2mm.
This is placed on a Busch Jager with 2 parts, 1 big switch and 2 small switches. You can still access the switch (on/off) if you remove the dimmer.
I was too late to make a picture of the switch. I added a picture of about the same switch but with missing 2 small switches on the right.
I should have used RAL1013 for matching color with the switch (plate).
edit: added an adapter for 1 switch. Now printed in RAL1013.
Print Settings
Printer:
P3STEEL
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
PolyMaker PETG
Category: Electronics