Clamp for 25mm pipes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pipe clamp to connect a 25mm pipe to another 25mm pipe. Used for a pipe with a solar panel on a boat. You can connect…
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 177
- Wydruki
- 1
- Wyświetlenia
- 1221
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pipe clamp to connect a 25mm pipe to another 25mm pipe. Used for a pipe with a solar panel on a boat.
You can connect 2 vertical pipes (see photo) or one vertical and horizontal pipe together.
For last one, just turn 2 pieces 90 degrees. They are symmetric.
There is also 1 piece with room for a nut inside. This way you can fit one part (2 pieces) at a different tension then the other part. I my case I want to be able to turn the pipe with the solar panel (towards the sun).
I printed with PETG with 100% infill. Used M6 stainless steel threaded ends and nuts.
Part klem_zonnepaneelv3metmoergat.stl is the same as part klem_zonnepaneelv2-2.stl, except is has 4 holes for nuts.
Use the following combinations of parts together:
- klem_zonnepaneelv2-1.stl + klem_zonnepaneelv2-2.stl or
- klem_zonnepaneelv2-1.stl + klem_zonnepaneelv3metmoergat.stl
Not klem_zonnepaneelv2-1.stl + klem_zonnepaneelv2-1.stl together.
I added also files for a T type clamp. I have NOT print this components by myself so hopefully it fits. I just added a extra hole. I don't know is it still strong enough.
Use the following combinations of parts together:
- klem_zonnepaneelv2-1a.stl + klem_zonnepaneelv2-2a.stl or
- klem_zonnepaneelv2-1a.stl + klem_zonnepaneelv3metmoergat-a.stl
Category: Hobby