1 / 2
Halterung für SKS-Schutzblech 53 mm zur Befestigung einer „Kühlerfigur”/ Bracket for SKS mudguard 53 mm for attaching a “radiator mascot” — zdjęcie 1
1 / 2

Halterung für SKS-Schutzblech 53 mm zur Befestigung einer „Kühlerfigur”/ Bracket for SKS mudguard 53 mm for attaching a “radiator mascot”

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nur eine lustige Sache für das Fahrrad/ Just a fun thing for the bike

Ocena
0 / 5
Polubienia
8
Pobrania
15
Wydruki
0
Wyświetlenia
308
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Es handelt sich um eine Halterung, die an ein SKS-Schutzblech mit einer Breite von 53 mm angesteckt wird und sehr fest sitzt. In der Halterung ist eine 6 mm große Bohrung vorhanden, in die der Dübel mittels Sekundenkleber eingeklebt wird. Darauf kann man fast jede Kühlerfigur anbringen.

Als Beispiel habe ich den “Bunny” von openscan genutzt. Die Bohrung in diesem Modell wurde im Slicer durch einen negativen generischen Zylinder erzeugt (siehe Example Bunny.3mf). Dieses hübsche Modell ist nicht Teil des Projekts.

 

Translation: DeepL

It is a bracket that attaches to an SKS mudguard with a width of 53 mm and fits very securely. The bracket has a 6 mm hole into which the dowel is glued with superglue. Almost any radiator mascot can be attached to it.

As an example, I used the “Bunny” from openscan. The hole in this model was created in the slicer using a negative generic cylinder (see Example Bunny.3mf). This attractive model is not part of the project.

Tagi