1 / 8
TX16S Magnetic Hawkeye Monitor Mount 3.5inch — zdjęcie 1
1 / 8

TX16S Magnetic Hawkeye Monitor Mount 3.5inch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fusion 360 file included! It's a magnetic mount for TX16S and Hawkeye 3.5inch FPV monitor Short demonstration video:…

Ocena
0 / 5
Polubienia
10
Pobrania
63
Wydruki
0
Wyświetlenia
761
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Fusion 360 file included!

It's a magnetic mount for TX16S and Hawkeye 3.5inch FPV monitor

Short demonstration video: https://youtu.be/c1FKlvVu_cY

Printing:

Open stl, split to objects/parts (there are 2 parts), orient as in photo and print!

0.2mm layer height

No supports for default printing orientation (in photo)

If you don't have magnets I think it could be printed as a single object by omitting splitting but support will be needed

Hardware parts:

M3x12 3pcs screws (2 screws for TX16S and 1 screw for monitor)

5mm diameter and 2mm height neodymium magnets (at least 8 but 16 is recommended)

Superglue or any other glue to stick magnets into slots

EDIT1:
Uploaded V1.1 which is less blocky

EDIT2:
Uploaded V1.2 Rugged version. It has thicker part in places where it broke so me after using it for a long time (cracked on layer lines). 4 perimeters or more, 50% infill triangular.

 

Category: R/C Vehicles

Tagi