Liczymy pasujące modele…
I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…
Joined gimbal covers for the Radiomaster TX16s radio. These are printed in PLA with a color stop part way. Black Hatchbox PLA: https://amzn.to/3sOiSnG Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
Did not like what I saw on thingiverse. 3D printers don't print very nice in the air, especially when you want ABS, HIPS, ASA, anything other than PLA, so I designed my own, where you can print it out of separate pieces and assemble it…
Protect gimbals and front sticks. New version with upper stick protection! Assembly the two parts with pressure, once in right position the upper part rotates freely. Insert the gimbal protection first, then rotate the other part: on the…
Gimbal Protector for the Radiomaster TX16S I have larger Gimbal Stick-Ends than the stock stick-ends. I wanted a Gimbal Protector that would fit over those but also fit in the Radiomaster TX16S case (the one that comes with the…
Quick mount mobile holder for the Radiomaster TX16s. Holds a mobile phone or similar (63 - apx. 90mm width) for use with Qgroundcontrol and Ardupilot or similar. Hardware: 1pcs apx. 60mm long 4.5mm (max 5mm) spring in tension. 1pcs…
!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (also fits for AG01 gimbals) Combined and Single Version Perfect fit with all Materials. I used PLA Please like if you downloaded it :-)
I've been looking for a good box for my TX16S for some time. Either very expensive or just simple polystyrene. Here is my own box. Very easy to print, Rock Solid and Perfect Fit!!! I do not use the internal module. Therefore no fixed…
Yet another transmitter stick protector model! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm or better Infill: 5% - 10% Category: R/C Vehicles
Sticks for TX16S M4 (no threads). Good grip for hybrid/pinch style. You are welcome to remix.
Gimbal protector for Radiomaster TX16S (MKI or MKII) / Jumper T16 radio (should work, not tested). Protector is from a one piece with a grip for easier removing. LED charging indicator is fully visible while the protection is on. Bigger…
This is my Pult Tray for Radiomaster TX16S transmitter. The parts named "Aloy_..." shall not be printed but rather made of Aluminium for best robustness. The Leather Applications are not required but make it comfortable and look…
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
I remix the original handle and put hole for screw and tightening nuts. Use a plug on one side of the handle for a good alignment
Die Pultbasis wird mit dem Rückteil des Senders verschraubt. Ich habe hierfür M3-Einschmelzmuttern in den Druckteilen verwendet. Der Sender muss zur Montage geöffnet werden (4 Schrauben hinten, 2 bei der Antenne) - Anleitung als…
Gimbal protector designed for the brand new Radiomaster TX16S MK3 . Tested and validated on the MAX version . This accessory helps protect your gimbals during transport and storage, preventing unwanted movement and potential damage. 📦…
For maximum strenght you should print it standing up with supports under the hooks
A very simple gimbal protector for the Radiomaster TX16S with holes big enough grand lotus stick ends Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: EcoJake PLA Doesn't…
This is a simple spacer to keep the 18650 battery holder from moving around and possibly damaging the power cables going into the radio If you ever plan on keeping your radio in your car I suggest you do not print this in PLA. I printed…
A Remake of the original Radiomaster TX16s Battery Cover with TB Logo. Original Make credit to Radiomaster RC. Unable to make this as a remix due to link being unavailable currently. Hope you enjoy. https://techbytes.ca/3dprints/ IG:…
A spacer to keep the 5000 mah lithium-ion battery from banging around in the battery tray. This will keep everything locked in place.
My remix of the original grips, which are more ergonomic for my hands.
remixed the original to make it stronger.
You need also M4 Melt thread
This is the gimbal protection remix designed because I have the x9d+ SE hall gimbals on my tx16s, and also wanted switch protection since I use a kwad bag. BIG THANKS TO: Tekniqueman with the original protection found here…
Simple gimbal protector for easier carying in bag without need of using bulky case
Protects Radiomaster gimbal sticks with a diameter less than 8mm
This is a single-piece gimbal protector for the Radiomaster TX16S Mk II transmitter. It fits over the sticks and lightly clips into the neck strap fitting. The model prints well in either PLA or PETG with 5-10% infill and supports on the…
Inlay for the Radiomaster Large carry case to house the Radiomaster TX16s better then original. Suggested is to print it in TPU which will give a nice and soft protection. it has room enough for an external TX including its mounted…
Features Fits perfectly for anything with a GoPro mount Great overall stiffness to prevent shaky footage Fits nicely inside your carrying case for the radio Quick-release design - no need to unscrew all the way and have 2 loose screws!…
These are replacement "levers" for the sliders on the T16 and TX16S. Not being a fan of the short stock ones when using them for pan and tilt on my FPV planes, I wanted something longer. Andrew Newton posted a design for some thicker ones…
Fusion 360 file included! It's a magnetic mount for TX16S and Hawkeye 3.5inch FPV monitor Short demonstration video: https://youtu.be/c1FKlvVu_cY Printing: Open stl, split to objects/parts (there are 2 parts), orient as in photo and…
A tool to remove the nut from a Radiomaster TX16S switch. No idea how long it will last, but it works and gets the job done. Printed with 2 walls, with an alternating extra, 60 pct infill.
capot avec ouverture sur le dessus pour : radiomaster tx16s
A simple plate for Radiomaster TX16S MKII that allows to remove stock antenna mounting if using only JR Bay as radio module.
Původní boční slidery mi zrovna moc nevyhovovaly. Vytvořil jsem tedy lehce delší verzi. Základní je o cca 2mm delší. Další verze jsou vždy o 1mm delší. Já používám tu základní verzi. Tisknuto z PETG. Tisk s podporami na podložce. Na…
Placa frontal superior RadioMaster TX16s
This is a remix of an already great design. I did not want to cut large holes in my case so I added M5 threads into the base of the handles to assist the glue in holding the handles on. I also created an alignment template (PDF) that can…
Higher Lid for the RadioMaster TX16S - designed it, so I can use 26650 8000mAh LiIon batteries while my 5000mAh LiIon was not enough for multiple days on the flying field. If you need a different height, maybe for 4x18650, let me know and…
I got tired of having my battery move around inside the back cover of my radio, so I did something about it. This battery tray is specific to the aftermarket 3000mAh rectangle packs. It holds it securely in place but still allows for easy…
Removed the built-in antenna and top switches on my Radiomaster TX16s and needed to plug the holes. Printed in TPU. Category: Other
I was dissatisfied with all of the available models. They were either too complicated or did not fit the AG01 gimbals. So, I made my own version. The cups fit the AG01 with fully extended sticks. For the TX16s MKII, they can be connected…
V2 Hawkeye mount design with Fusion 360 files No supports and no brim needed Held by friction Requires 3pcs M3x12 (2 screws for TX16S and 1 screw for monitor) 3 slots in radio mount currently has no use but it's left in case later mounts…
These 3d printable plates replace a stock part and limits joystick inputs to a particular shape. Each mask works on both the right and left sticks. The pictured example was printed from PETG with supports at 0.1mm layer height and 30%…
Although the RM TX16S Mk3 is a decent enough radio, the right and left slider levers are horrible. I use these as throttle for a F5J glider (and other gliders) and in case of quick response (during approach or low altitude) my finger…
Sometimes you just need a little reminder of what you programmed all the switches to do. This helps for a quick glance, especially as a pre-flight reminder. Print a few for your different configurations, or print one and swap out the…
https://github.com/manbehindthemadness/MavPi
Same print settings for the original cover, I added a strap mount holder so that I can strap my 3S LiPo to the TX 16S for using with my full crossfire module. Category: Replacement Parts
https://github.com/manbehindthemadness/MavPi
Hello everyone! (ツ)╯ I designed a Li-Ion holder for the Radiomaster TX16s case (Fig. (A, 4)). It is for carring four Li-Ion 3,7V batteries (Fig. (B, 1), (C, 1)). It is specifically designed to use with protective casing for the…
I knocked up this little mount so I could attach a little Hawkeye Little Pilot 3.5" monitor onto my TX16S Transmitter. It has a stepped 3mm mount hole (so you can use small washers if required) and uses an M4 bolt and nut to clamp it to…
Tx16S wall hook with space for USB sim dongle
RadioMaster TX16s - Asa y pestillo de la caja de transporte de RadioMasterRC
I have used two spacer and reduced one side of the Spacer. So it fits better for me and the lid of my radio controller closed easier. I also inserted a negative model of the extractor Tool, so the extractor tool has its place. I have…
Some handles/sleeves for quickly touch identify the TX16S switches in FPV, when you can't look at your remote. Just print in TPU 95A and enjoy!
I was unsatisfied with the available modular antenna mods and made this piece so you can mount the antenna connector with the nuts approprietly. I bent the antenna slightly so that everything fits nice since the module bay is close to…
A foldable transmitter tray designed specifically for the Radiomaster TX16S Mark II. The project was developed to improve comfort during long flying sessions while remaining lightweight, portable, and secure. The design incorporates…
I was unsatisfied with the available modular antenna mods and made this piece so you can mount the antenna connector with the nuts approprietly. I bent the antenna slightly so that everything fits nice since the module bay is close to…
Sometimes you just need a little reminder of what you programmed all the switches to do. This helps for a quick glance, especially as a pre-flight reminder. Print a few for your different configurations, or print one and swap out the…
This case is printable on a 220x220 bed, longest side is 218.5mm so it just fits. Printed in PETG, about 250-300g total with 2 walls and 15% infill. I realized there were no cases out there for the TX16S that I could find, part of that…
Die Pultbasis wird mit dem Rückteil des Senders verschraubt. Ich habe hierfür M3-Einschmelzmuttern in den Druckteilen verwendet. Der Sender muss zur Montage geöffnet werden (4 Schrauben hinten, 2 bei der Antenne) - Anleitung als…
I designed this cover to block out the bright screen when I'm practicing in a sim on my computer. It doesn't latch or lock on the controller but it does a decent job blocking most of the screen. Category: R/C Vehicles
I wanted a wireless buddy box for my Radiomaster TX16s This buddy box would allow to wireless link two TX16s in Master/Trainer mode. Radiomaster is already selling this kind of module . However their modules need to be linked (soldered…
The Thingiverse Customizer didn't work so instead I downloaded OpenSCAD, changed the settings manually, and built the STL that way. After a couple revs, this is what I came up with for the RadioMaster TX16S with the regular Hall effects…
Somehow there isn't a nut anywhere online for the tx16s switches. WARNING: THESE SWITCH NUTS ARE NOT PERFECTLY THREADED. I couldn't get the exact thread diameter so I got as close as I could and these stay on but do not lock down like the…
Radiomaster Tx16s Leg Rest for the CNC Handle version. Still easily removable. Super comfortable and the radio angle is good for your wrists. All credit to the original creator https://www.thingiverse.com/thing:4596611 Print Settings…
Radiomaster TX16S antenna plate for a long range 8db 2.4 Ghz antenna. At the same time making the antenna removable in case you want to replace your stock antenna. I made it so that it's easy to print with a flat bottom. It wil take the…
The Radiomaster TX16S with the folding stand is great. I am using the TBS Tracer module and the stand taps the bind button on the back of the radio and at times can be a little annoying. I also don't like the idea of the module being…
This is top plate to install SMA connector in TX16S. Best connector will be one with additional screws on side. For easy print top part is flat. Print requites support.
I wanted something that I could easily remove from my radio when I didn't want it on. I use 12x3 magnets so that i can stick it on when i need it there and pop it off when i don't. The piece that goes over the strap loop is in TPU. The…
Si pierdes o se te rompe la tapa de la bateria de la RadioMaster TX16s ya tienes de repuesto.
Si pierdes o se te rompe la tapa del modulo externo ya tienes repuesto.
Repuesto de los Empuñaduras traseras de la RadioMaster TX16s.
Repuesto de las Empuñaduras laterales RadioMaster TX16s.
I wanted small wall hook for the radio, and could not find good alternative, so here is my own design. This wall mount was designed for CNC-upgrade handle, but should work with the original as well. Print Settings Printer Brand: Prusa…
Designed for printing in ABS @250C through a 0.4mm nozzle at 0.2mm layer height. Print with button face on print bed. Supports will be required for some areas, and finishing may be required on the retaining flanges due to the print angle…
This was inspired by 'maltvat' https://www.thingiverse.com/thing:4681214 This is a new design not just a remix. The previous design by 'maltvat' does not always easily come out. This design has a bit more play and a little handle that you…
This is the replacement Part for the TX16S Vibration Motor. It covers the hole motor and can be used with the standard screws. I drilled the holes with a 2mm drill. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No…
