Pulttray for Radiomaster TX16S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my Pult Tray for Radiomaster TX16S transmitter. The parts named "Aloy_..." shall not be printed but rather…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 3518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my Pult Tray for Radiomaster TX16S transmitter.
The parts named "Aloy_..." shall not be printed but rather made of Aluminium for best robustness.
The Leather Applications are not required but make it comfortable and look professional.
The Stick Protector is large because I installed the big Sticks with integrated switches from https://rctechnik.de/
The Box is made of wood and covered with stone Art color.
Its Dimensions and parts can be extracted from the DesignSpark Mechanical .rsdoc file.
Print Settings
Printer:
Franx 3D Printer
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Filament: Das Filament PLA and TPU Black
Notes:
Pay Attention on printing the big parts Body_L and Body_R: to avoid warping you need very good adhesion on the heated bed (60°C) and print very slowly (20-30mm/s) and don't use cooling Fan.
Category: DIY