26650 LiIon / LiPo / LiFePo - TX16S Battery Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Higher battery lid for the Radiomaster TX16S, for usage with 2x26650 LiIon
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 616
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Higher Lid for the RadioMaster TX16S - designed it, so I can use 26650 8000mAh LiIon batteries while my 5000mAh LiIon was not enough for multiple days on the flying field.
If you need a different height, maybe for 4x18650, let me know and I make one.
You need to print it with support.
May print setttings:
Layer height: 0.2mm
Walls: 3
Bottom Layers: 3
Top Layers: 4
Infill: 15%
Printed it in PETG and ABS, both work fine without adjustments.
Happy printing
Sandor - DM4DS
if you feel I earn it, please send a tip or support me on Patreon:
https://www.patreon.com/dm4ds
https://paypal.me/dm4ds
or buy me a coffee!
https://buymeacoff.ee/dm4ds
Thanks for your support.
Sandor - DM4DS