1 / 3
Spur gear / main gear. Mod1 47t for Thunder Tiger Tomahawk or other nitro rc cars — zdjęcie 1
1 / 3

Spur gear / main gear. Mod1 47t for Thunder Tiger Tomahawk or other nitro rc cars

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement spur / main gear for the thunder tiger tomahawk.

Ocena
0 / 5
Polubienia
4
Pobrania
25
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

shredded my spur gear because of a loose engine mount. found no replacement, so i made one myself. mod1 with 47 teeth. 5cm diameter, inner hole is about 2,52cm. screw holes are spaced evenly and are 3,3mm in diameter. screw holes are spaced about 2,6cm from eachother. 

I printed it with pla+ with 70% cubic subdivison infill and so far it has survived some off roading without any visible damage.

Added a 6 hole version.

Tagi