1 / 3
Focusrite Scarlett Solo 4th Gen - Under Desk Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick model I made to mount my interface below my desk.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
A quick and dirty model that worked for me - I wanted a friction fit, so it is tight. Insert Focusrite at your own risk. Some more notes:
- Only for Focusrite Scarlet Solo Gen 4 - USBC
- You must remove the rubber feet before inserting the model
- Hardware required: I used 10mm flat head screws. Hardware access is recessed and accessed via the bottom of the model; you will need a long screwdriver/driver. (My desk was MDF, so it was easy to use a hand tool; hardwood may require a drill with an extension to clear the recessed holes.
- I used a BambuLab XC1 with a .4mm nozzle. Print tolerances may vary and affect how well it holds your device (feel free to remix/edit for your liking)
- I'd recommend test printing the initial few layers and doing a test print to avoid wasted filament.
- I'll most likely not be updating this model as I made it as a one-off for personal use, but got some requests on Reddit for the STL - here ya go…