1 / 3
Focusrite Scarlett Solo 4th Gen - Under Desk Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick model I made to mount my interface below my desk.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
A quick and dirty model that worked for me - I wanted a friction fit, so it is tight. Insert Focusrite at your own risk. Some more notes:
- Only for Focusrite Scarlet Solo Gen 4 - USBC
- You must remove the rubber feet before inserting the model
- Hardware required: I used 10mm flat head screws. Hardware access is recessed and accessed via the bottom of the model; you will need a long screwdriver/driver. (My desk was MDF, so it was easy to use a hand tool; hardwood may require a drill with an extension to clear the recessed holes.
- I used a BambuLab XC1 with a .4mm nozzle. Print tolerances may vary and affect how well it holds your device (feel free to remix/edit for your liking)
- I'd recommend test printing the initial few layers and doing a test print to avoid wasted filament.
- I'll most likely not be updating this model as I made it as a one-off for personal use, but got some requests on Reddit for the STL - here ya go…