1 / 4
MTM H-50-XL Case Insert for 300 Norma Magnum — zdjęcie 1
1 / 4

MTM H-50-XL Case Insert for 300 Norma Magnum

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a case insert for the MTM H50-XL for the 300 Norma Magnum. Print using high temperature filaments!

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a case insert for the MTM H-50-XL plastic case. It allows the 300 Norma Mangum cartridge to be used with the MTM H-50-XL case, which allowing each round to sit on it's shoulders bullet side down.

I've been printing these using the Polymaker HT-PLA-GF (High Temperature, PLA, Glass Fiber) on my Core One. On the C1 I use the Polymaker PLA setting, but update the density per cubic centimeter under filament. On the Bambu H2D printer Polymaker has a profile for the HT-PLA-GF filament. The HT-PLA-HT is able to withstand 150C when annealed for 1 hour at 100C in an oven ( https://wiki.polymaker.com/polymaker-products/printer-profiles/pla/ht-pla-gf ).

Print this model top down in order to not need supports.

No commercial use of this model is permitted without written permission of the creator.

Tagi