Liczymy pasujące modele…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). There's also a version which has more shallow…
Have fun :) Both Versions 3 Wände / 3 Walls 15Infill Bambu also 2 Colors or other Printers with Break :) Regards
This is my model of the SSV Normandy SR2 from the Mass Effect series. It is the Alliance version from the third game. The model is some 50cm long and is a kit. The pieces are divided per their color. For the assembly, I recommend to watch…
Guitar holder for normal and for wide neck. Wall mount. There is also an amplified version added for heavier guitars, or if you have kids at home :) For guitar neck size 37mm (ukulele), 43mm (electric, narrow neck guitar) or 53mm…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is my model of the SSV Normandy SR1 from the Mass Effect series. The ship is done in scale with my SR2 . The pieces are divided per their color. For the assembly, I recommend to watch the following video.
Basics about this design: The design of this elegant octagon bin was actually done in a few minutes. Only after I had printed it from PETG, I realized that when printed in vase mode, the slight shrinking of PETG gives it an additional…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Low poly skull that's easily printable with vase mode (choose cut version to make a bowl) I fixed bottom nose overhang angle, it's now prints without gaps Also, bottom surface is now flat and without low steep overhangs Full model has too…
All normal LEGO Brick from the application LEGO Studio. 19 real Bricks LEGO (with the logo on it)
Calibration cube with a city on the inside. There is a lot of fine details to test your printer. Mine just looked like some spikes in a cube. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: Doesn't Matter Supports: No…
If you'd like a commercial license to sell physical prints of this model (It's a best seller on Etsy), please join my paid Club membership . An adapter that clips a Fitbit air pebble to a normal watch band. Enables wearing the fitbit air…
Leviathan Axe from god of war key chain or just a normal model if you want, it prints in one peice
made this for my generic keyboard, i hope it works for anyone else!
The print was designed to be flat, stackable and easy to ship. The interface gets raised enough to guide cables below it and the 25° tilt provides better view and access to the controls on a regular desk. To avoid slipping and prevent…
Updated 9/10/2024 to require much less support material Included .step file and Bambu print profile Accepts the QLS Fork and is meant to be screwed to something like a desk or nightstand with wood screws. PLA is fine for this application.…
Just made the short neck the normal dummy 13 size for others to use.
Rugged Box Eyeglass Case Remix from Fully parameterized rugged tool box by Whity. Fully parametric Fusion 360 model can easily be customized for special needs. I wanted a rugged style case for my goggles and made it 40mm x 35mm 145mm,…
Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…
Undaunted: Normandy base for miniatures with a hole for tokens
Hi everyone! This is a library of geometric dish soap that can be printed normally (without supports) or printed more artistically with organic supports. Customize your dish Use PNG, SVG, or JPG Images to generate custom soap dishes using…
The classic .177 caliber pellet design with a skirt and an option to print a version made with a hole so you can fit a 2mm ball bearing for extra weight and accuracy. I have tested these pellets tremendously on my air rifles and they work…
This is a pocket sized turbo whistle or siren which emits a loud and extremely annoying WHEEEEEEEEEEE when you blow into. Remixed from: https://www.thingiverse.com/thing:455093
Alternative pose, as requested by stark002. difference between 3 files: just mouth Category: Creatures
Another Funny Sign - "It's not my fault you thought I was normal, you've have more than enough time and plenty of clues to Figure That Out", multi colour print, printed in ZIRO PLA Twinkling Black and Sunlu Matte white PLA. For more funny…
If you're interested in a prebuilt or custom blaster build, please check GryphonsAndMore on Etsy! This is sort of hard to explain. The Gryphon is a “nerf” style foam blaster by Flygonial. There is a remix called Shirdal P4 by Skwiggums.…
This is a charger dock/cradle for the Nintendo New 3DS, both regular and the XL/LL. This project started to solve some problems I had with this really cool dock from Hackaday , and I ended up totally redesigning it. Here's a list of this…
This is a lego head that you could eather use to build off of or to use as another lego piece. This is the actual size of a lego minifigure head.
Airpods Pro now supported as well. !!!! Note that the AirPods Pro is untested as i do not own them !!!! Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl This is…
Assets\ft\ft033\ft033_013\mod\ft033_013.mod3 Note: Join part1 and part2 in your slicer (they didn't boolean correctly in Blender) part3 is non-manifold as imported. Use as reference if you want to add more fluff. Category: Creatures
I created a spreadsheet in the FreeCAD file to adjust the measurements of the ruler and the bolt. So it should be easily adjustable even for users who are not familiar with CAD. To save the environment (and your prusament) there is a…
All normal, technic LEGO Brick from the application LEGO Studio. 7 real Bricks LEGO (with the logo on it)
Please check which version you need and decide where the different boxes should be. I made a small graphic below: One Holder can now fit: 1 Double and 2 Normal boxes I made 2 Versions for the small Holder (VS1 + VS2) (with different…
A gridfinity baseplate and bins for Systainer Mini. The baseplate is split in two parts, so you can print it on a standard (prusa) buildplate or even on Prusa Mini. :-) You can choose between a grid-variant with or without magnets. The…
This adapter makes it possible to connect standard soda bottles directly to Sodastream carbonator. Use a seal from a normal bottle cap, an o-ring or something else to properly seal the soda bottle properly to the adapter. Model is made…
Ein Set von verschiedenen Passungen der Stößelaufnahmen für den Ventilblock. Mein Problem: Bei mir ist es vorgekommen, dass mit Schwankungen beim Druck der Ventilblöcken manche Stößelaufnahmen-Dichteinsätze bei PETG von Firma XY gut,…
29. Dec. 2023 Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON!…
I just made a already vary nice design into a keychain
I did not care about being compatible with other tiles. I just tried to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
Public domain model of the Normandy from Mass Effect by JoshuaS . Originally uploaded to Blend Swap .
It's just a nice totally normal keychain… Its nice.
My wife always had packets of tampons laying around and it started to bother me, and her. So we fixed it with this simple model. Hope you enjoy!
!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (also fits for AG01 gimbals) Combined and Single Version Perfect fit with all Materials. I used PLA Please like if you downloaded it :-)
This is a new mount for the Biqu H2 on any Artillery Sidewinder or Genius that I designed and tested with https://www.youtube.com/c/SolarityTechnology . There are two versions, one for the normal hotend, the other for a volcano hotend,…
A small, maybe a little overweight - but friendly smiling - dinosaur / dragon. There is a normal and a lowpoly version. Scale them as you like. Mine are 50 mm high. Best to print in 0.1 mm, mine are printed with 0.2 mm, 20% infill. They…
I comb my beard and mustache a lot and the lines were too thick for my liking. I added a bit of steps to the lines and now it's more like a normal comb without messing with the style. Upping the Z height to 3.5mm gets it more strong and…
No other existing model has the right sizes of my socket set, so made another one Based on Zack's gridfinity
Not just shamelessly stolen from Gurtmail but also heavily inspired by Majyk Oyster's x10 grapes, I realized that JLCPCB can actually produce twice as much for about the same price. This obviously depends on the used material. So, after a…
This is a larger bumper to replace the original one. The standard bumper is not enough protective for my 6 years old boy's driving skills so I designed this one. Head on collision (front impact) is absorbed either: by the bumper ("use…
https://www.printables.com/model/92532-baby-yoda-elmex-toothpaste-vomit/files
These are two test blocks for M3 threaded inserts. the first is for normal sized M3x5.7 the second is for small sized M3x4.0 The inner diameter of the holes is 3.8 / 3.9 / 4.0 / 4.1 / 4.2 millimeters to test which one fits best. I used…
Polestar 4 Charging Cradle Retaining Lip – Keep Your Phone Secure! 📱🚗 Does your mobile phone slide out of the charging cradle in your Polestar 4 whenever you accelerate a bit too enthusiastically? You’re not alone! This retaining lip…
Here are four straight rails that can be used with Gravitrax, each spanning 1 to 4 tiles. The length is approximately equivalent to that of the original Gravitrax rails. Note : I'll be uploading separately some rails that are 1 to 3 mm…
📚bookend Normal📚 Dimensioni: 17.5cm 9.5cm 12cm Nozzle 0.4mm Print 0.2mm / 0.3mm Infill 15% Support ❌ Brim ❌ (Se il tuo piatto non ha molta aderenza)✅ Here are all our plans, take a look. Qui ci sono tutti i nostri progetti, dacci un…
Simple mount for Nameless RC Naked 9 / 10 / 11 for common GoPro mount and iFlight mount. I design with wireslot for betaFPV bt2.0 connector. Secure with the long m2 screw comming with the NLRC kit. Category: 3D Printing
No other existing model has the right sizes of my socket set, so made another one Based on Zack's gridfinity
This model was created based on the cover of “The Design of Everyday Things” by Don Norman. The model stands 167 mm tall (the body being 132 mm tall). I printed both the body and lid at the same time with a detailed layer height and no…
The retention clips are quick and easy to use, except a bit fiddly to open. Added finger tabs to make it easier to manipulate. Remixed both the normal retention clips, and the larger one that is for the drive side on the receiver spindle
Roller blinds curtain attachment for normal curtain rail, adaptor bracket for curtain rail, curtain track holder for zebra blinds, kornise stor perde takma aparati, rollo vorhangschienen adapter …easy to print and fits perfectly
Support test of your 3d printer. By activating Tree Support > Hybrid you will be able to test both the normal support on the horizontal overhang and the tree support on the inclined overhang.
Just print it, let it cool down and try to take out the middle part. Print-Settings: 2 Perimeters and minimum 5% Infill → If you want more, go higher. If you like you can try out my other difficulties of Tolerance Tests here:…
English version Below Bonjour, J'ai juste modifié les plots de fixation du superbe Objet de 1sPiRe de Thingiverse. https://www.thingiverse.com/thing:4616510 Hello, I just modified the fixation plot from the marvelous 1sPiRe's thing, From…
D20 dice scale the stl file in your slicer to 20 mm or greater use silk filament and the numbers will be shiny on the dice…a little bit hard to see but looks magic the rigged dice is filled 6mm at the bottom ( when dice is scaled to 4cm…
Embrace the festive spirit with our favorite electric companion, Pikachu, all decked out for the holidays, wearing a cozy Christmas hat, snuggled up in a festive Christmas sock 🎅 With a rosy-cheeked smile and twinkling eyes, our Pikachu…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
You can glue two 10 x 1.5 mm round magnets in the base. Print instructions Recommended infill angle: 0° Color changes: White -> Black -> Gold Low speed and high temperature will create a shiny top surface. There are "holes" inside the…
Airpods Pro now supported as well. Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl This is designed to charge 3 devices at once. Charging cradle for Apple…
Modèles 3D développés par Florian Kévin sous l'impulsion de Mahdi Chemkhi.
I couldn't find a normal super lube cap for regular use, not for packing bearings specifically, so I made one. Based on Pigeon 's design, with a quite a few modifications. Fit is great and function seems to be working quite well. I…
By request: Cerberus logo set for Martin's brilliant Normandy SR2 model. Quick and easy convertion in Thinkercad, took litterally 10 minutes. Please visit user @Martin on printables for the magnificent base model of the Normandy SR2 Files…
Print in place and you can test your printer's accuracy by printing them inside each other.
Use it for that special rose or.... Use the vase for small messages of love. Write them down put them inside and if you ever want to know what's written you'll have to smash the vase. Use supports for printing and at least an overhang…
Ich habe 2 Versionen, einmal mit LED, und ohne! Die Beleuchtung ist direkt am Bohr Eingang, und Leuchtet die Bohrstelle gut aus! Die beiden Versionen sind für einen normalen Boden Staubsauger! Die Beiden Versionen sind in den Druck Datein…
This model is compatible with the lego system.
UPDATE 2024-08-12: Boy, I've learned a lot about model design since I made these and shared them on Thingiverse originally. Someone may still want them, so I'm sharing them here. At some point, I may make updated versions, just to show…
Hard drive stand for six 3.5" NORMAL drives. This version is 6x 26mm and can hold 6x NORMAL 3.5" HDD's. If you are looking for SLIM version (typically Seagate 500GB-2000GB) it's HERE PLA or PETG 0.2mm layer height 100% infill no supports
So I really enjoyed making the knight and decided it's time for another generic archetype and what more generic than a mage. The hat was inspired by Big Hat Logan and for printability I uploaded the model with hat separated. Please post a…
Infinite Area Is A Cube with Things Inside of it. There Are Multiple. They Are Little Tests To test the 3d printer. i do not recommend "infinite-area_4.stl" because it has the biggest file size and it was lagging the website i made it on.…
This is my design for an Undaunted Normandy Insert. Everything fits nicely with room for the rulebooks on top. One caveat with my design is it is designed to hold the unit tokens in the coin cases I purchased, so this is unlikely to work…
Note d'impression Afin de respecter au mieux les épaisseurs, il faut imprimer les rondelles M2.5, M3, M6 et M8 en 0.10mm DETAIL. Les autres rondelles en 0.20mm.
Chair Leg Pads Collection This is a collection of chair leg pads for round and square chair legs, from 5 mm diameter to 50 mm diameter . The pads are designed to print with a flexible filament such as TPU. All designs are available both…
This scale model provides a bird’s-eye view of a motte and bailey castle, a design that served as the "starter home" for the Norman aristocracy following the conquest of England in 1066. Combining speed of construction with formidable…
Attachment hook for perforated plate, perfect for tools like small-medium size spanners/wrench sets. Standard size for 38 mm board. Uses M3 nut and bolt for tighten. Printing setting suggestion: Orientation: On side Infill: 80+% (Gyroid…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) PUMPKIN BUDDY / HALLOWEEN…
A modern knurly spiral planter / vase plant pot for your flowers, plants or succulents. Comes with thick, thin and vase mode models. No supports required. Dimensions: 112.5x112.5x101.4mm Print Tips: - No supports required - For vase mode…
V1: using normal peg. I haven't print it and tested it but it should work. V2: using 2 MultiConnect Peg printsetting: infill 10%, parameter 3 and v1 needs tree support
The washer is a precise STL model created in accordance with ISO 7089, DIN 125 and PN 82006 standards, ensuring full dimensional compliance with international flat-washer specifications. It is a small part with defined dimensions (10.5 mm…
Psycho - Norman Bates - Wouldn't Hurt a Fly - 1960 3D printable model.
This clamp is designed for 16mm pvc conduits both flexible and rigid ones. Ideal for installing cabling for ceiling lightning. Can be printed in PLA and PETG without issues. It snaps thightly in place and can be removed with some force.…
With this project you can mark page and line, which you readed.
A Minecraft Golden apple! Not much to it. There's 2 3MFs and 1 STL Included; A flat, 1 sided, 4 & 3 color golden apple, and a flat, normal, 4 & 3 color red apple. Compatible with A1 mini build plate size . Should print great on all…
Reduced the wall width in order to print faster. Combined with my fast print model from the battery holder.
Dosing funnel for ROK porta filter, normal version
Two different models of PocoX3 phone case. One simple and another with reinforcements to better resist possible knocks or falls. To be printed in TPU or similar. Play with your slicer to get various designs, and show me please!
An alternate stand for Martin's gorgeous Normandy SR-2 which mounts the ship at a slight angle to show it off better.
Holder for EV chargers with possibility to hang-off the cable.
I got a request for a .300 Norma Magnum ammo 10pcs case. The spacing is 10pcs/14,9x91,5mm. The shell was so close to the .338 i made before so i used that as template and just made the bullet 1,5mm longer. I wanted to use the latches i…
For magnetizing, I recommend 60 mil flexible magnetic sheets, and 10mm x 2mm round neodymium magnets for the miniatures. Fits 3rd or 4th edition Space Hulk.
Gun emplacement based on the Longues-sur-Mer battery. It is not intended as a scale model, but as a similar casemate site. According to Wikipedia, the guns used at that site were 15 cm TbtsK C/36 naval guns. If so, the gun on this build…
