Apple 3 in 1 Charging Dock with Ikea Livboj QI (AirPods pro and normal)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airpods Pro now supported as well. !!!! Note that the AirPods Pro is untested as i do not own them !!!!
- Ocena
- 4,5 / 5
- Polubienia
- 33
- Pobrania
- 354
- Wydruki
- 5
- Wyświetlenia
- 2994
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Airpods Pro now supported as well.
!!!! Note that the AirPods Pro is untested as i do not own them !!!!
Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl
AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl
This is designed to charge 3 devices at once.
- Charging cradle for Apple Airpods (uses lightning cable and a single m3 screw to hold it in place - The screw thread length should be around 10mm - if the head of the screw is low-profile it could go up to 12mm without sticking out).
- Charging location for the Apple Watch (uses magnetic charger).
Stand for the IPhone XR (and other models alike) (uses Ikea Livboj QI charger).
The stand should support all types of phones, as long as the phone is approximately 160cm in height. The allowed deviation depends on the phone QI charging placement, but I have used 150cm phones without any issues.The bottom of the stand has cable guides to collect all 3 cords into 1 outlet
The Airpods stand was inspired by "Apple 3 in 1 charging station (IKEA Qi)" by Cedro22: https://www.thingiverse.com/thing:3704811
Print instructions
Category: Mobile Phone Summary
Airpods Pro now supported as well.
!!!! Note that the AirPods Pro is untested as i do not own them !!!!
Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl
AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl
This is designed to charge 3 devices at once.
- Charging cradle for Apple Airpods (uses lightning cable and a single m3 screw to hold it in place - The screw thread length should be around 10mm - if the head of the screw is low-profile it could go up to 12mm without sticking out).
- Charging location for the Apple Watch (uses magnetic charger).
Stand for the IPhone XR (and other models alike) (uses Ikea Livboj QI charger).
The stand should support all types of phones, as long as the phone is approximately 160cm in height. The allowed deviation depends on the phone QI charging placement, but I have used 150cm phones without any issues.The bottom of the stand has cable guides to collect all 3 cords into 1 outlet
The Airpods stand was inspired by "Apple 3 in 1 charging station (IKEA Qi)" by Cedro22: https://www.thingiverse.com/thing:3704811
Print Settings
Printer Brand: Creality
Printer: Ender 3 Pro
Rafts: No
Supports: No
Resolution: 0,12
Infill: 30
Filament: Spectrum PLA Black