1 / 5
Apple 3 in 1 Charging Dock with Ikea Livboj QI (AirPods pro and normal) — image 1
1 / 5

Apple 3 in 1 Charging Dock with Ikea Livboj QI (AirPods pro and normal)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Airpods Pro now supported as well. !!!! Note that the AirPods Pro is untested as i do not own them !!!!

Rating
4.5 / 5
Likes
33
Downloads
353
Makes
5
Views
2,987
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Airpods Pro now supported as well.
!!!! Note that the AirPods Pro is untested as i do not own them !!!!

Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl
AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl

This is designed to charge 3 devices at once.

  1. Charging cradle for Apple Airpods (uses lightning cable and a single m3 screw to hold it in place - The screw thread length should be around 10mm - if the head of the screw is low-profile it could go up to 12mm without sticking out).
  2. Charging location for the Apple Watch (uses magnetic charger).
  3. Stand for the IPhone XR (and other models alike) (uses Ikea Livboj QI charger).
    The stand should support all types of phones, as long as the phone is approximately 160cm in height. The allowed deviation depends on the phone QI charging placement, but I have used 150cm phones without any issues.

    The bottom of the stand has cable guides to collect all 3 cords into 1 outlet

    The Airpods stand was inspired by "Apple 3 in 1 charging station (IKEA Qi)" by Cedro22: https://www.thingiverse.com/thing:3704811

Print instructions

Category: Mobile Phone Summary

Airpods Pro now supported as well.
!!!! Note that the AirPods Pro is untested as i do not own them !!!!

Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl
AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl

This is designed to charge 3 devices at once.

  1. Charging cradle for Apple Airpods (uses lightning cable and a single m3 screw to hold it in place - The screw thread length should be around 10mm - if the head of the screw is low-profile it could go up to 12mm without sticking out).
  2. Charging location for the Apple Watch (uses magnetic charger).
  3. Stand for the IPhone XR (and other models alike) (uses Ikea Livboj QI charger).
    The stand should support all types of phones, as long as the phone is approximately 160cm in height. The allowed deviation depends on the phone QI charging placement, but I have used 150cm phones without any issues.

    The bottom of the stand has cable guides to collect all 3 cords into 1 outlet

    The Airpods stand was inspired by "Apple 3 in 1 charging station (IKEA Qi)" by Cedro22: https://www.thingiverse.com/thing:3704811

    Print Settings

Printer Brand: Creality

Printer: Ender 3 Pro

Rafts: No

Supports: No

Resolution: 0,12

Infill: 30

Filament: Spectrum PLA Black

Tags