1 / 7
Apple 3 in 1 Charging Dock with Ikea Livboj QI (AirPods pro and normal) — zdjęcie 1
1 / 7

Apple 3 in 1 Charging Dock with Ikea Livboj QI (AirPods pro and normal)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Airpods Pro now supported as well. Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl AirPods Pro:…

Ocena
4,333 / 5
Polubienia
24
Pobrania
170
Wydruki
3
Wyświetlenia
1710
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Airpods Pro now supported as well.

Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl
AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl

This is designed to charge 3 devices at once.

  1. Charging cradle for Apple Airpods (uses lightning cable and a single m3 screw to hold it in place - The screw thread length should be around 10mm - if the head of the screw is low-profile it could go up to 12mm without sticking out).
  2. Charging location for the Apple Watch (uses magnetic charger).
  3. Stand for the IPhone XR (and other models alike) (uses Ikea Livboj QI charger). The stand should support all types of phones, as long as the phone is approximately 160cm in height. The allowed deviation depends on the phone QI charging placement, but I have used 150cm phones without any issues.

    The bottom of the stand has cable guides to collect all 3 cords into 1 outlet

    The Airpods stand was inspired by "Apple 3 in 1 charging station (IKEA Qi)" by Cedro22: https://www.thingiverse.com/thing:3704811

    Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0,12

Infill:

30


Filament:

Spectrum PLA Black

Category: Mobile Phone

Tagi