1 / 6
Minisforum 795S7 Corsair Nautilus AIO — zdjęcie 1
1 / 6

Minisforum 795S7 Corsair Nautilus AIO

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for a Minisforum 795S7 motherboard to mount a Corsair nautilus 240 AIO.

Ocena
0 / 5
Polubienia
4
Pobrania
40
Wydruki
0
Wyświetlenia
716
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

I made this after I got a minisforum pc to use as a server and after testing I realized it was better than my main rig but it was too loud with the stock fan and cpu cooler. I initially made an adapter for a noctua fan found here, https://www.printables.com/model/1387709-minisforum-790s7-noctua-fan-conversion. 

This is what I currently use with a Nautilus 240. I tried it with ABS and PETG but the sustained heat in the case would cause the adapter to loose pressure and the PC would get hot spikes and overall higher temps when playing games. So I currently am using a nylon with 25% carbon fiber filled from sainsmart and it has held up well. 

The heat inserts are the hardest part because they have to be filed or milled down to conform to the bevel of the adapter as if it was one smooth surface. I would recommend filing it down a little further than you would anticipate so the cooler doesn't bottom out on the insert and prevent proper pressure from being applied to the cpu surface. (WARNING! The minisforum cpu is a bare die cpu there is no ihs to evenly spread the pressure. You can damage they cpu beyond repair if you over tighten!)

Tagi