Toolmaker’s Hammer Case for Starrett No. 815
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slip-fit case for the Starrett No. 815 Toolmaker’s Hammer. Protects the hammer and magnifier in your toolbox.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a fitted case I designed for the Starrett No. 815 Toolmaker’s Hammer — the tiny hammer with a built-in magnifier. The case keeps it safe in your toolbox and prevents the magnifier from getting scratched.
Included files:
- STL (ready to print)
- OpenSCAD source (for tweaking dimensions)
Printing Instructions:
- Print in PLA or PETG (I used PLA, 20% infill).
- No supports needed.
- Orientation: flat side down.
- The case is a slip-fit design — no hinges or latches.
For a snappy appearance, apply some adhesive-backed foam or cork to the underside. If you are feeling fancy you may want to line the case with cork as well.
I used a vinyl cutter for the Starrett logo.
You can see this case in action in my YouTube Short here: