P
Printables
Machinist square, Angle tool 90° 60° 45° 30°
necessary tool
Wyniki wyszukiwania: machinist
Liczymy pasujące modele…
P
Printables
Machinist Parallel Rugged Box
Edited from the original Rugged Box design to fit 8 sets of machinist parallels. Parallels are 6" long, 0.250" thick & tallest one I have in there is 1.625". Could fit slightly taller ones too. Each slot fits 2 parallels. Printed with 5…
P
Printables
Gridfinity Tool Shop Machinist Square
Printed in Elegoo Rapid PETG - White. No magnets or screws.
P
Printables
NVMe fan for Machinist X99 E5-MR9A Pro
The purpose of this project is to increase airflow and lower the temperature of the NVMe slots on the Machinist X99 E5-MR9A Pro motherboard by adding a dedicated fan. Before utilizing this solution, average NVMe temperatures of 60 °C were…
P
Printables
VRM cooler for Machinist X99 E5-MR9A Pro
The stock VRM cooler on the Machinist X99 E5-MR9A Pro uses a very poor-quality fan, developed an annoying rattle, and is overall inadequate. This project replaces that stock cooler with a mount for 2x 40x20mm fans and copper heatsinks.…
P
Printables
Protective cap for Machinists Hammer - Schonkappe für Schlosserhammer DIN 1041
The protective cap minimizes the risk of damaging the workpiece with the hard hammer, especially with delicate materials TPU/TPE Recomended CAD Files are included: l4 inner lenght b width f2 width of inner champfer Recommended Print…
P
Printables
Angle/Sin Vice Jaw for Machinist 6" Vices.
Fits standard 6" (Kurt) machinist vices where bolt holes are 3.875" from center of each other. Use two pins that correspond to the angle you want (ex. for 0, 1, 2, 3, etc. degrees need to have a pin on in one of the A's on the left side…
P
Printables
Drill Bit Organizer ø10-13mm for Machinists
This listing is my entry in the flash-contest “Sorting Trays” . If you download this please help me in this contest my giving this like & perhaps even “make”-picture. /Cheers! A long time ago…. I needed a Drill Bit Organizer for ø10 mm to…
P
Printables
Metric machinist blocks
Modeled after common metric blocks that are available on the internet. 25 - 50 - 75 mm block features Height 25 mm Width 50 mm Length 75 mm Hole diameter 10 mm Hole spacing (center to center) 15 mm Chamfer 1 mm @ 45° on all outside holes…
P
Printables
Metric machinist blocks (Ø15 mm holes)
Classic 1-2-3 / 2-3-4 block, but in metric form. Includes a 25-50-75 mm block, and a 50-75-100 mm block.
P
Printables
12" Machinist Caliper Stand all models
This 12" Machinist Caliper Stand is a must-have for any machining enthusiast. It is designed to hold all makes of calipers and is perfect for those who need a reliable and sturdy stand for their tools. Crafted with precision and care,…
P
Printables
machinist square holder
Machinist square holder The square holder is pretty generic and should fit most squares in this size range (otherwise the cad files is included). Print standing on left side with 15% gyroid/grid infill and no support. You can hang it on a…
P
Printables
4" inch round machinist stone holder (crystolon machine knife stone disc)
Holder for a 4" x 1.5" thick round machinist stone? Way better than the junky boxy they come with. We have these size stones all over our shop just laying on work benches or stored in random repurposed containers. Will either both of…
P
Printables
Machinist Jack for lite use
A quick machinist jack for use with a milling machine. I used it to support some 3mm aluminium whilst doing some drilling operations. it was quicker than waiting for a part to be delivered. I would only use this for the litest of uses.…
P
Printables
Gridfinity Machinists Square Holder
Gridfinity Machinists Square Holder. My Square was ~120mm X 75mm
P
Printables
Machinist parallel holder
Print in sets of 4 to holder your parallels in place during repeated operations. Uses 10x3 magnets. Print magnet side up and i used 100% infill.
P
Printables
Gridfinity Machinist Square Tray, 3 piece 3x4
Gridfinity Machinist Square Tray, 3 piece, 3x4. Holds 3 piece machinist squares like Little Machine Shop kit. Printed in PLA with basic settings and 0.2mm layer height. You may need to confirm dimensions and clearance as not all sets are…
P
Printables
Gridfinity Mr. Pen 4 Pack Machinist Ruler Holder
Gridfinity holder for Mr. Pen Machinist Ruler, 4 Pack (6, 8, 12, 14 inch) . This is a 1x9 Gridfininty holder for storing these rulers horizontally. If you want to store them vertically in a 1x1 bin check out SeriousBug's Gridfinity…
P
Printables
Machinist Micrometer Bead
Standard PLA settings, Tree Supports and brim highly recommended
P
Printables
CNC-Pillow: The comfortable headrest for machinists
Have you ever had the problem that your tender machinist forehead got all cold and numb when pressing it against the window of your CNC-machine? Do not be afraid, I got you covered! Get yourself a neck pillow, print out the parts for…
P
Printables
Screwjack, Machinist jack
I needed something to hold my window open when the wind blows so it doesn't slam shut. I found very few of these around. Or that were fully made out of plastic, which is fine, but id rather have metal bearing components. Total height:…
P
Printables
Multiboard Machinist Square Mount
These are made for various sizes of Mechanical Squares. If you need a size that I did not upload and have an onshape account, you can copy this document and enter the appropriate width, depth, and height for your square. For the width and…
P
Printables
Machinist Job Stone FFXIV Final Fantasy Soul Stone
Machinist Job Stone/Soul Stone from FFXIV re-submission due to being unsearchable. Category: Games
P
Printables
Machinist Parallel Rugged Box
Edited from the original Rugged Box design to fit 8 sets of machinist parallels. Parallels are 6" long, 0.250" thick & tallest one I have in there is 1.625". Could fit slightly taller ones too. Each slot fits 2 parallels. Printed with 5…
P
Printables
machinist hammer hanger/hook
its a hanger/hook for a machinist hammer with a round head. the hammer head dia is 1.125in=29mm. printed in pla. included is .iges and the .step file
P
Printables
Golden Ratio Turner's Cube (Machinist Cube)
Turner's Cube, also known as a Machinist Cube or Lahe Cube. This was modeled using the golden ratio to determine the difference in size between each subsequent cube.
P
Printables
Small Machinist Square
Since i needed 16 Pieces of a machinist Square for a school Woodworking Project it was way cheaper to print them. Size inner angle: 40mm x 60mm / 1.5748in x 2.3622in Printed on a Core One in PLA+ (from RBD) My Settings: 0.20mm STRUCTURAL,…
P
Printables
Gridifinity Machinist Square set holder
Simple 3x5 Gridifinity bin for the Groz set of four machinist's squares (2", 3", 4" and 6"). Printed in PLA on a K1 Max with a 0.6mm nozzle, took 2hrs 4min to print and used 147g of PLA filament. I bought my square set at busy bee tools:…
P
Printables
Machinist Center line Marking Tool
Mark the center line of objects easily and without measuring. This is particularly useful when marking center on small pieces of material for machining. The included F3D model is parametric so you can change the number of teeth on the…
P
Printables
Gridfinity Machinist Square
STACKABLE holder for four squares. I have the Westward set that came in a blue container.
P
Printables
Machinist 90-degree Skadis holder
The model is easy to print, no supports are needed. PLA 0,2mm layers STEP and Fusion files uploaded for easy modifications
P
Printables
GRIDFINITY MACHINIST ENGINEERING MEASURING TOOLS ORGANIZER
Designeed in fusion 360 using the gridfinity design to organize various measuring tools as shown in the photos. Dimensions are included in the photos and are in mm. Clamp shown in photos is a 12-inch scale clamp 3d printed. Text is raised…
P
Printables
GRIDFINITY MACHINIST BIN HOLDERS FOR SPECIALTY DRILLS
Designed in fusion 360 using the gridfinity design to organize specialty drills in my machinist toolbox. Simple bins with labels. Left-handed, lettered, numbered, and brass sharpened drills. Letters are raised so a pause can be added to…
P
Printables
3 inch machinist square box
3 inch machinist square! rev 2 -added a finger slot to make it easier to remove the square.
P
Printables
MACHINIST DRILL DRIFT HANGABLE NO AMS NO SUPPPORTS
Designed myself in fusion 360 as a backup to a steel drill drift. Recommend 100% infill to get the most strength. Please like, follow, rate and upload your makes.
P
Printables
GRIDFINITY MACHINIST CHAMFER TOOL ORGANIZER
Designed myself in fusion 360 using the gridfinity design. NO AMS, NO SUPPORTS. Letters are raised so a pause can be added for single color printers. Feel free to edit the pockets text. Small pocket is for a round radius tape measure.…
P
Printables
Skadis Machinist Block Mount
A holder for two 1-2-3 or 25-50-75 machinist blocks, side by side. Requires 2 of CSD_Salzburg's universal hook .
P
Printables
Gridfinity - Machinist V-Block holders (Ver 1)
These V-block holders allow for easy organization of SMALL machinist v-blocks for a benchtop mill. They take up 2x1 gridfinity units, and I stash the clamps (and some extra hardware) for them in a 2x1 bin directly underneath them in my…
P
Printables
Gridfinity - Machinist V-Block holders (Ver 2)
These V-block holders allow for easy organization of SMALL machinist v-blocks for a benchtop mill. They take up 2x1 gridfinity units. This organizer is a variant of the slightly-smaller machinist v-blocks, with clamps, that are posted…
P
Printables
I/O Shield / Rear Port Cover for Machinist B450 Motherboard
Jest to niestandardowa tylna osłona wejścia/wyjścia wykonana dla płyty głównej Machinist B450.@Pasuje do standardowego otworu ATX I/O i jest łatwy do drukowania bez wsparcia.@Pokrywa pomaga oczyścić wygląd tylnego panelu i chroni otwartą…
P
Printables
Gridfinity bin for machinist/screw jacks
2x2 Gridfinity bin for these little screw jacks. They are the 23-30mm size (which actually go to 36mm), they show a different size on amazon: https://www.amazon.com/dp/B0759YSFQ5?ref=fed_asin_title&th=1 This is a single color print,…
P
Printables
Gridfinity bin for machinist square set
3x5 Gridfinity bin for a machinist square set. This set came from Grizzly Industrial and may or may not for other brands. This is a single color print, ignore the color around the top edge. I add them to my gridfinity bins using a…
P
Printables
Gridfinity machinists jack-screw storage trays
Gridfinity storage trays for (2) Shars 202-5718 and (4) Starrett S190 machinists jack screw sets. Base tray is from https://gridfinity.perplexinglabs.com Printed on Core One with Sunlu PLA+ 3 bottoms, 2 perimeters, 3 tops and 15% fill and…
P
Printables
Machinist Jack
A proof of concept for a 16.6667 threads per inch machinist jack. The odd thread pitch results in the head of the jack moving .010" per flat on the hex head or .005" from flat to point on the head. Obviously, a 3D printed machinist jack…
P
Printables
IO shield for MACHINIST X99 D8 MAX
There is 2 STL file, one with 1 USB 3.0 row (broken and desolder on photo, fit perfect to standard PC case), second one with full ports (not tested).
P
Printables
Gridfinity Tool Shop Machinist Square
Printed in Elegoo Rapid PETG - White. No magnets or screws.
P
Printables
NVMe fan for Machinist X99 E5-MR9A Pro
The purpose of this project is to increase airflow and lower the temperature of the NVMe slots on the Machinist X99 E5-MR9A Pro motherboard by adding a dedicated fan. Before utilizing this solution, average NVMe temperatures of 60 °C were…
P
Printables
VRM cooler for Machinist X99 E5-MR9A Pro
The stock VRM cooler on the Machinist X99 E5-MR9A Pro uses a very poor-quality fan, developed an annoying rattle, and is overall inadequate. This project replaces that stock cooler with a mount for 2x 40x20mm fans and copper heatsinks.…
P
Printables
Protective cap for Machinists Hammer - Schonkappe für Schlosserhammer DIN 1041
The protective cap minimizes the risk of damaging the workpiece with the hard hammer, especially with delicate materials TPU/TPE Recomended CAD Files are included: l4 inner lenght b width f2 width of inner champfer Recommended Print…
P
Printables
Caliper Dock | Premium Workbench Organizer for Machinists & Makers
Protect your precision measuring tools and instantly declutter your workbench with the PrecisionPro Caliper Dock , engineered for zero-scratch storage and rapid, one-handed access.
P
Printables
4 Inch Machinist Square Storage Box (Fits 4in x 3in PEC Tools Square)
I liked the original design but it didn't fit my PEC tools 4 inch square so I scaled it and added additional blocking regions so the square still fits snug. Fits any 4 inch square with overall outer dimensions of 121mm x 76mm or less,…
P
Printables
Gridfinity PEC Machinist Square
2x3 Gridfinity holder for 2 PEC machinist squares, specifically the 3x2.5 and the 4x3 inch versions.
P
Printables
Gridfinity Storage Tray for Shars Machinists Squares
Gridfinity storage tray for Shars 3, 6, 8, 10in machinist square set (303-6333). The 4u X 7u tray will have to be split into at least 2 pars on most printers. Dovetail joint and glue strongly advised. I made a couple of the blade recesses…
P
Printables
Metric 1 2 3 Machinist Block mixed sizes w/ holes
I thought it would be nice to have a metric version of these. I started with a 10x20x30mm version and scaled things up. They follow the 1x 2x 3x ratio for the side dimensions. Hole diameter is half of the width of the smallest size. For…
P
Printables
Mounting brackets/claws for a machinist vise
As I got a new toy for my mini milling machine I needed some claws to attach the vise to the table. No chunk of steel large enough was in stock and as PLA printed in the correct orientation is about as strong as aluminum I opted for the…
P
Printables
Machinist Jack remix
An homage to Bills Machinist Jack model with a few quality of life tweaks
P
Printables
Machinist/screw jack
A simple jack, optimized for 3d printing with strong threads that don't require any support. If using the model, print with at-least 3 walls at 0.2mm layer height for optimal thread strength. Scale the jack base by roughly 2% in X and Y…
P
Printables
Z-Axis Hight Calibration Tool / Machinists Jack
My 3D printer has 2 Z-axis motors that adjust the height of the X-axis. I was looking for a solution to align the two sides as easily as possible. The result is this support. The support has an adjustment range of 96 - approx.160mm and a…
P
Printables
Small Machinist Parallel Tray
Pretty easy print. I used standard Prusa slicer settings for PLA at .15 layer. If desired and for a small fee, I can customize or emboss your name or logo onto desired faces.
P
Printables
1/8"X6" machinist parallel tray
Designed and printed to take up less space in my Kennedy Machinist chest, then tray that was originally shipped with
P
Printables
Box for Precision Machinist Square / Schlosserwinkel Aufbewahrung
Box for an machinist square 100x70mm with base Aufbewahrung für einen Schlosserwinkel 100x70 mm mit Anschlag material: 3DJAKE TPU A95 Orange nozzle: 0.6 / layerheight: 0.3 / infill: 15% no support needed lid and base slide together…
P
Printables
Machinist Square Stand
I made this stand to hold my Woodstock D4089 Machinist Square Set. Amazon US:…
P
Printables
Machinist square box
For machinist square 100mm x 70mm DIN 875 / 2. Designed with FreeCAD.
P
Printables
Machinist Ruler Holder - Skadis
This print has drop in pockets for magnets measuring 17mm by 4mm. Print using supports for the hooks. The dividers are set for rulers with a width up to 27mm and 19mm.
P
Printables
US Navy Machinist Mate Rating with NEC 4283
US Navy Cryogenics rating for wall art. This is a remix from - https://www.thingiverse.com/thing:3764192 - which I made the model thinner and added the text for the MM Cryogenics NEC 4283. All remix was done in Tinkercad.
P
Printables
Machinist Square Tool Holder (Individual)
This tool holder is designed for the iGauging machinist square set, but probably works for any similar sets from other manufacturers: https://www.rockler.com/igaging-3-piece-engineers-square-set Should you have a different set, an…
P
Printables
Machinist Square Tool Holder (Stacked)
This tool holder is designed for the iGauging machinist square set, but probably works for any similar sets from other manufacturers: https://www.rockler.com/igaging-3-piece-engineers-square-set A left and right version are provided as…
P
Printables
Machinists Ruler Holder - Magnetic
Simple holder optimized for a typical machinists ruler. This design integrates a 10mm x 3mm circular magnet, and sits flush against a surface with the use of 3M double sided tape. Use 2 or more of these. print at 100% infill. magnets can…
P
Printables
Modular Machinists Organiser Tray System
Tray system to hold standard 5C & ER32 collets - plus plain trays of various lengths. Print as many as you need, and join them together with the bow-ties. Each tray has a label holder to allow easy identification of collet (so long as you…
P
Printables
Machinist's Speed Vise Handle
I liked the concept of https://www.thingiverse.com/thing:3043641 but started over from scratch to do it my way: parametric, in OpenSCAD. The provided files are sized for the vise I have, but it is very parametric and should be easy to…
P
Printables
Kennedy Machinist Toolbox Drawer Pull
Missing the drawer pull for your Kennedy toolbox? Print some of these and replace your missing drawer pulls. Use an M3 screw with a nut to attach them. Material: PLA Layer height: 0.2mm
P
Printables
IKEA Skadis machinist square holder
Holder for a 3 inch/75 mm machinist square for the IKEA Skadis board. You will need 2 x "universal hooks" to mount it. Hook was designed by Chris Schneider , check out his awesome IKEA Skadis Collection
P
Printables
Machinist Jack with M8 Bolt
A “machinist jack” is a tool to support overhanging work pieces, e.g. on a milling machine. It reduces deflection due to tool pressure. The second photo is a demonstration how a jack might work. This design is the result of me wanting to…
P
Printables
Desktop machinist square
I wanted to make some scribe lines on parts that get scratched pretty easily, so I designed and printed this 'machinist square'. I keep this one on my desktop and the real deal in the workshop. :) Dimensions: 50mm x 75mm x 15mm Edit…
P
Printables
Machinist Oil Pot (Magnetic Base)
Oil pot and brush holder for cutting oil or similar, there is a cut-out in the base for a retained magnet (max diameter 25 x 3 mm) which will hold the pot solidly to your machine (it does double duty collecting swarf :-) ) Needs a pause…
P
Printables
The Machinist
This is the machinist model I designed in appreciation for all machinists out there. Included are the anvil, height gage, saw, welding mask, and hammer. Note: This is not an accurate model of an ideal machine shop due to the number of…
P
Printables
Wall Control Slots For Combi-squares, angle rulers, and try/machinist squares (DDD based)
The parent system is neat, but it contained no way to slot tools like try or machinist squares and digital angle rulers on wall control panels. Additionally, I found some of the sidepiece flats and pins in the parent to have hooks that…
P
Printables
Machinist Rule (not ruler LOL) Holder
Designed to solve a specific problem you may or may not have. I had seven steel machinist's rules, three 6", three 12", and one x 24", that either didn't fit (24") or were constantly jumbled in the top of one of my toolboxes. So I…
P
Printables
Starrett + PEC Machinist Combination & Double Square Wall Holders
I wanted to get my Starrett combination square and my double square out of my toolbox and somewhere more accessible. So I took inspiration from a set of holders I found from mkegadgets and changed a couple of things. First, I made a…
P
Printables
Skadis - Parameterized L Holder (Machinist Squares, Double Squares, etc.)
Part of Ed's Skadis Shop Stuff collection, a set of Skadis holders and gizmos intended to have pleasant affordances and share common visual design elements. Fits the Skadis Universal Hook by CSD_Salzburg. Uses the Slide-Down Universal…
P
Printables
Wall Control Machinist Square Holder
Another Wall Control Accessory. Works with amazon special machinist square set. Will need support for the pins, I didn't want to make the part an inch wider just to eliminate the need for supports when printing…
P
Printables
Gridfinity Machinist Squares/Feeler Gauge/12' Measuring Tape
Holds 60x40 Kinex Machinist Square https://taytools.com/products/kinex-machinist-square 100x70 Kinex Machinist Square https://taytools.com/products/kinex-2-piece-din-875-1-machinist-squares 200x130 Kinex Flat Machinist Square…
P
Printables
Machinist Jack (Parametric Files Included)
Basically this is a long screw and nut that can be used to support pretty much whatever needs supporting. In my case I made this to support my GPU since I noticed some deformation in the PCB from sag. These jacks use a metric trapezoidal…
P
Printables
Machinist 123 Fidget Block
Model of a machinist's 123 block with print in place, captive balls. Prints best with normal support on build plate only.
P
Printables
Compact organizer for 6" machinist parallels
Compact organizer for machinist parallels because the original shipping containers are extremely bulky. Also tried to incorporate a singled handed pickup feature. Push down on the right side with your pinky and the parallel will tilt up…
P
Printables
Box for machinist square DIN 875/2 100x70mm
Box for DIN875/2 100x70mm machinist square. Fits exactly this one model that I got from AliExpress. Design is mine, although I used hinges and latches from TS100 case design from - https://www.thingiverse.com/thing:4438787
P
Printables
Machinist's cube, AKA Turner's Cube
Turner's cube is a torture or show off piece that CNC machinist would make. Turns out , it's not that easy to print either - right kinda supports are required to make it happen. I challenge you to print it at 45 degrees! Give it a go!…
P
Printables
Machinist's division plate (in OpenSCAD)
Background I have a very old metalworking lathe (Zyto) made in the 1930s/1940s, and it didn't come with graduated dials on any axis. I made some a while ago but they weren't too great, so now I plan to make some decent ones. Unfortunately…
P
Printables
BAHCO Combination Square Holder for Ikea Skadis CS150 and machinists square
See the original model for lots of great insight! Authored on OnShape: https://cad.onshape.com/documents/cf86bf811480b75a6990c559/w/b26cfa5d56c8f99ff39a660b/e/d2633e8f0533055b629a541e?renderMode=0&uiState=65aa36872aa89048859bdda5
P
Printables
Machinist square storage
I've made this storage for my Wurth Machinist square. My square has a total length of 80mm, but it will fit the 75mm too. Printed with “standard” Voron setting in ASA, but PETG, PLA or ABS are fine too since material isn't critical here.
P
Printables
Fully 3D Printed Machinist Jacks \ Fidget with Two Head Styles 35-52mm
3D Printed Machinist Jacks are better than no machinist jacks. This version is pocket size and can range from 35mm to 52mm with nice knurled rings. They are quick to print and quite strong being able to handle my 175lb weight as sliced.…
P
Printables
Machinist Jack
I little machinest jack that I will be using to hold up my RC Crawlers as I build, fix or modify them. It is useful if you need to get them level and make repeatable measurements. Print it, put in the nut at the top, and screw in the M5…
P
Printables
Gridfinity Machinist's Square Holder
I went with 5u height because of my other holders in table saw tools drawer