Machinist Square Tool Holder (Individual)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mountable tool holder for 3 different sized machinist squares, specifically the iGauging set.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This tool holder is designed for the iGauging machinist square set, but probably works for any similar sets from other manufacturers:
https://www.rockler.com/igaging-3-piece-engineers-square-set
Should you have a different set, an Inventor file is provided and the parameters can be changed to adjust the size of the tool holder.
- fullLength: Measure entire length of square
- shelfDepth: Thickness of the square base and add 1-2mm
- backHeight: Height of the square base
- bladeThickness: Thickness of the thinner side of the square
- bladeWidth: Width of the thinner side of the square
- cutawayWidth: Width of material to remove in the middle to make it easier to pick up
A zip file is included with the preconfigured XML parameter files for the iGauging set if you just want to tweak them a bit.
No supports needed. Print at .16 layer height and oriented with the shelf on the build plate:
