Machinist Square Tool Holder (Stacked)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mountable tool holder for 3 different sized machinist squares, specifically the iGauging set.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 933
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This tool holder is designed for the iGauging machinist square set, but probably works for any similar sets from other manufacturers:
https://www.rockler.com/igaging-3-piece-engineers-square-set
A left and right version are provided as STL's depending on which way you want to be able to slide them out from.
Should you have a different set, an Inventor file is provided and can be adjusted by modifying the parameters.
Each size (large/medium/small) has a depth, length, blade width and blade thickness. Here is a diagram on how each one is measured:
No supports needed. Print at .16 layer height and oriented with the shelf on the build plate: