1 / 8
Vacuum adapter for ziploc bags (AIRMSEN) — zdjęcie 1
1 / 8

Vacuum adapter for ziploc bags (AIRMSEN)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to help pull air from freezer bags using AIRMSEN handheld tool

Ocena
5 / 5
Polubienia
21
Pobrania
86
Wydruki
1
Wyświetlenia
379
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

There was a print similar to this on another site some years ago but it was for a FoodSaver model handheld vacuum that got really expensive for a bit and is now no longer sold. 

I wanted one but not enough to buy one of those so i went looking for another option. I got on the web and found one at a decent price ($23) with good reviews. Its seems to work well and comes with some bags of its own but i like to have the option to be able to use regular freezer bags. It took me a few versions but this one works pretty well for me, especially for a 20 minute print.

To use the device you press down with your thumb and index finger a bit to seal the sides of the “straw” during air remove then slide the device out of the bag and press the seal as it exits. 

I print them at .12 layer height so there is more layers on the straw which is failrly tight tolerance between the top/bottom and the air tunnel. 

Tagi