Liczymy pasujące modele…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
This is an "airtight", compact and easy to fill filament buffer for your MMU2.0 setup. It uses a check valve for the filament so it is not pushed back on to the spools. Watch the video below on how it works. Print instructions How to fill…
Added editable text area
Designed for a set of 10. Simply print the the body and lid. Both part screw together. The one in the example is printed at 0.3 Layer Height. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long…
I printed this model as one of the first on my first 3D printer, because I wanted such a flower vase. But later, in some places, I noticed gaps when printing in vase mode with a 0.4 mm nozzle. So I tried to correct the slopes of the…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
Updated Version 1.1 9x Short Darts ----- Silly Shell ----- with 3x airtight barrels 9x Short Darts (3x3) or 27x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly…
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
The ElastiCap is an innovative, 3D-printable bottle cap made from flexible filament (e.g., TPU). It effectively replaces traditional single-use crown caps, providing an airtight, leak-proof, and insect-proof seal for standard glass…
What's New in Version 2: Standard 4mm Support: Added a second set of files with a 3.8mm hole specifically designed for 4mm OD PTFE tubing, which is the most common size in the 3D printing community. Slot Design: I replaced the closed hole…
Clean up your setup with this perfectly-fitted Food Bag Sealing Clips, Various Sizes, Chip Bag Closer, Airtight Seal Design Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
UPDATED: The Vented Version is considered the current version and can be used for vented or non vented but it's a little easier to assemble. The reversed thread knob is for for the right side of the non vented files so you probably will…
I wanted a smaller nut bowl with multiple compartments and I saw this muffin form at IKEA ( https://www.ikea.com/at/de/p/hemmabak-muffinform-grau-10573994/ ). I chose to design this airtight seal to prevent the nuts from getting moist for…
Best printed in PETG or TPU. PLA will work but is too brittle. Suitable for 75mm diameter cans.
Thanks for checking out the Ultimate Bowden Tube passthrough! This passthrough is a bit extra but I wanted an almost zero compromise solution for dry box builds. Parts List: For Bowden pass-through 2 x M3x12 FHCS (Flat-Head Cap Screws) 2…
This airtight capsule offers a reliable solution for safely storing essentials like pills, matches, and small tools, keeping your belongings secure in any environment. Compact, durable, and versatile, it’s the ideal companion for camping,…
I printed this model as one of the first on my first 3D printer, because I wanted such a flower vase. But later, in some places, I noticed gaps when printing in vase mode with a 0.4 mm nozzle. So I tried to correct the slopes of the…
Intro This is a 2 piece dry box feedthrough with threaded connection to 4mm push-to-connect fittings. There is a recessed area to add a piece of foam to scrub any debris from your filament before it reaches the extruder. Files are…
Catch, to make storage box more airtight for filament. Use some draught excluder tape to help air-proof the lid. I used PETG as it has a little more flex, but I'm sure PLA would work. No support is needed. These are the boxes I used, they…
This is a device that holds cards that identify the filament stored in a 4 litres airtight container. This design is slightly curved to fit the end of the container. The size of the cards are 42.3 mm x 76 mm, which corresponds to a 1/3 of…
My daughter bought an Air Up water bottle. This was supplied with six fruit aroma cartridges (called Pods). The Pods are originally packed in airtight plastic packaging. However, my daughter wanted to try out all the flavors and unpacked…
This object holds a square hygrometer in a 4 liters airtight container. This object was designed to monitor the 3D printing filament moisture. I've used a small piece of Velcro to mount the holder to the container. The hygrometer is 45 mm…
Updated Version 1.1 9x Short Darts ----- Silly Shell ----- with 3x airtight barrels 9x Short Darts (3x3) or 27x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly…
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
JCreateNZ --- I bought Bar Keeper's Friend but it didn't come with a lid, so I made one. Should fit both Barkeeper's friend cleanser and cookware cleaner & polish. If your printer is accurate it will snap on for a tight fit and seal (but…
This design is a sheath to provide an airtight plug on syringe needles. I use it to keep oil and solder paste from drying/leaking. It should be printed in TPU (95A recommended). I provide various versions for different needles, the first…
The ElastiCap is an innovative, 3D-printable bottle cap made from flexible filament (e.g., TPU). It effectively replaces traditional single-use crown caps, providing an airtight, leak-proof, and insect-proof seal for standard glass…
Simple lid for common ikea 365+ pitcher. As cold brew is very oxygen sensitive and can loose a lot of taste in first few hours of brewing, this lid gives quite good seal from outside air. Obviously for best results TPU is recommended,…
I had problems with moisture getting into my filament and causing little pops on the side of my prints. I realized when the problem did not occur with a fresh spool of filament that my filament was absorbing moisture. This Airtight…
What's New in Version 2: Standard 4mm Support: Added a second set of files with a 3.8mm hole specifically designed for 4mm OD PTFE tubing, which is the most common size in the 3D printing community. Slot Design: I replaced the closed hole…
Keep your marker collection perfectly organized and always ready to use. This organizer with an airtight lid is specifically designed to preserve the life of your professional markers and prevent them from drying out. Key Features: High…
These drawings are not parametric, but can be sized in the parameters of Freecad. The thread for the cap is custom, and I could not ever get it to parametrically scale (if you change the container dimensions, you will have to monkey with…
Detailed Description (EN) This is a protective cap and sealing solution designed for standard M6/4mm PTFE quick couplings often used as Bowden Tube connectors in 3D printing (e.g., for dry boxes or multi-filament setups like the Bambu Lab…
Remix of Coffee Bag Clip. Now Printable on the PRUSA MINI
Update – 2025-12-04 A new Filament Sample Label System has been added to the model. This includes: Filament Sample Tags (Filament Sample with Honeycomb) Honeycomb Sample Holder Panel The new system allows quick identification of installed…
i have no clue how to export this as an stl so here's the 3mf files instead. on the bright side the 3mfs includes sillybutts' recommended print settings and you can manually change the text options updated december 9 to lower the "corvus"…
This is a remix of stephenmhall's "Airtight Filament delivery system (almost) " Not that there was anything wrong with the original, I just had an excess of 3mm hex bolts lying around, and no 4mm's that the original needed. I also wanted…
Clean up your setup with this perfectly-fitted Food Bag Sealing Clips, Various Sizes, Chip Bag Closer, Airtight Seal Design Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
UPDATED: The Vented Version is considered the current version and can be used for vented or non vented but it's a little easier to assemble. The reversed thread knob is for for the right side of the non vented files so you probably will…
I modeled this Drybox because I couldn't find any, fitting two 70mm Spools. You can directly print from it. The Drybox is designed to be as airtight as possible. This is supposed to make the silica gel stay dry as long as possible.…
If you wanna upscale it, do not forget to upscale both. Hope you enjoy it. 3 layers 0.2/0.25mm layer height.
12x and 9x silly shell with airtight barrels and a slim front fits in yeeeeeeeeethammer, sillysledge, sillypilot, the 9x fits in breacher but dont eject properly i designed this for my yeeeeeethammer so that it shotguns with decent spread…
Silly Shell with 3x airtight Half Dart Barrels Supposedly these work with .50 Cal foam balls, but i have none to test with. These are quicker for me to print than the full shells, and eject a little farther This is a 3mf with settings…
Airtight case for 3DJake's wonderful 250g spools. To keep them always dry. The case comes with two versions. For 6mm and 4mm PTFE tubes. But you can use the case also without the tube. Insert 10x10x4mm sponge with a hole in the centre.…
*** I’m no longer posting to Thingiverse, or Updates. If you wish to see all my work and updates to items posted to Thingiverse please visit my personal website https://gallaghersart.com/design ,OR Google “GallaghersArt 3D” (GallaghersArt…
This is the handle for the airtight storage containers (similar to these https://www.amazon.com/Airtight-Containers-Vtopmart-Organization-Chalkboard/dp/B07C79SGBC/ on Amazon ). I had 2 of them break in the last week so I designed a new…
Features This is a design I made in OpenSCAD after discovering the Slide Zipper at my favorite 100 Yen store. After a few iterations, I ended up with a model that prints in place without supports , that is monolithic (no movable parts),…
This will replace the original locking handle for the containers that are about 5" square. I used PETG at 50% infill with 2mm top/bottoms and walls. I used supports and printed it laying down (in the locked position).
This sealed and airtight box takes inspiration from the watertight doors of ships. The box is sealed when the screw, with a spring under it, is pulled up and rotate on the slots of the cover. The spring will then press on the cover. It…
Hi, in these troubled days when we are facing the coronavirus COVID-19 all over the world, we are facing a mass mask shortage. Some of my family members work in health care, and I was wondering what to do to help. So I decided to design a…
To make this cable entry, a print "Part B-C" and a print of "Part A" (A1, A2, A3, A4, A5 or A6) must be made. The thickness of the plate in which the cable entry is to be mounted, determines which "Part A" is to be used. This solution is…
Here's a very simple filament storage and feeder solution. Others have used this same one, but this shows that you can complete this with none or very simple printed parts. The container is $9, so it's really economical for single spool…
For the 33 quart + 12 quart combo set; both use the same clasp. I'm missing one of them so whipped up a functional enough replacement. Print instructions Other than needing supports it's an easy print. 0.3 draft settings are OK, I used 5%…
O rings that should work: https://www.amazon.com/Nitrile-Rubber-Rings-Metric-Sealing/dp/B0BFMWKP79/ https://www.amazon.com/uxcell-Rings-Nitrile-Rubber-Diameter/dp/B07W72F7RF…
These O rings that should work: https://www.amazon.com/Nitrile-Rubber-Rings-Metric-Sealing/dp/B0BFMWKP79/ https://www.amazon.com/uxcell-Rings-Nitrile-Rubber-Diameter/dp/B07W72F7RF…
This Is Sauce Or Oiled Bottle Cap for Gordon Food Service Plastic bottle and other standard plastic Bottles , TPU friendly !
I searched a long time for an storage box where my filament is save from air humidity. My setup is that my printer stands at the ground in a corner of a room and i build a wooden box around it. I have a 3 in 1 Nozzle from Geeetech, so i…
My stand to put the Airtight box on. It can be tilted if you not use the block.stl. Otherwise its level. Level works best for me with my rollers. (Se separate upload) But some friends wanted a tiles version.. These belong together:…
I love the original design but it's just a bit too bulky to pocket it all the time. I wanted to be able to hang this from a carabiner or string, so I added a post with a hole through it. I scaled down a generic carabiner to fit so I could…
Airtight Coffee Bean Container Introduction I am a huge coffee lover. I brew my own V60 and espresso, so I need to store coffee beans so that they don't lose their flavor. The problem with containers that I've owned so far have all had…
I had never-ending problems with my filament getting wet. I tried the Sunlu filament “dryer”, but that didn't help because my filament is too hygroscopic. So I designed a spool holder that sits inside an airtight Rubbermaid food…
I use the silica gel containers from @gdrag ( https://www.printables.com/model/65922-silica-gel-spool-container) and @brunocubateli ( https://www.printables.com/model/368229-pancake-silica-gel-container ). Since I wanted to stock up on a…
I wanted to use the AMS in an airtight box. To fit in I designed a new holder. I bought this airtight box: IRIS Ohyama, 70 liters https://www.amazon.de/gp/product/B06XXD6FHC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 First print out…
I wanted a smaller nut bowl with multiple compartments and I saw this muffin form at IKEA ( https://www.ikea.com/at/de/p/hemmabak-muffinform-grau-10573994/ ). I chose to design this airtight seal to prevent the nuts from getting moist for…
This is an improved version of Bu66as's filament tube cap https://www.prusaprinters.org/prints/70444-petg-tube-cap-for-ptfe-4-mm-od I used the original model as a starting point and redesigned it with these improvements: Optional o-ring…
I really enjoy drinking a lot of coffee. Since I don't like dealing with all the fuss of coffee preparation, I was always bothered by the hassle of correctly opening and airtight resealing the packaging. The coffee container from Trudslev…
I love using the Sterilite totes with the gasket embedded into the lid to store filament. Combined with reusable desiccant, they work great at keeping filament dry. Unfortunately the latches are prone to breaking the pivot pins, rendering…
It helps me Insert the Filaments. I use this when there is a stubborn one. Just insert to tuhe side of the Silicagel box and it works. Nothing special for Printing. I use PLA and that works Fine.
This is just another Silicagelbox for the "filament buffer (airtight, compact & easy to fill)" It is a closed Constuction and with a Modifier, there is a Grid Put in the Lid. For printing, the Supports should be activated to everywhere…
This plug fills a 2-in hole through plywood while allowing an electrical cord to pass through. This is designed for a router dust collection box, though it could be used for any other roughly-air-tight plywood box. The plug is composed of…
Englisch: With this filament feedthrough, up to 4 PTFE tubes can be guided simultaneously through a material thickness of 1 mm to 45 mm. The implementation can be airtight. The PTFE hoses should have a diameter of 4mm. Instructions: 1.…
This model should use with shed plate for DAISO container introduced below link. Drybox with a filament delivery function made using an 5.5L airtight container https://www.thingiverse.com/thing:4563022 Notice: Remove the support…
Introducing Mcwomfa, the Magnetically Connected Way Of Moving Filament Around! I've been working on tidying up and organising my nerd cave, and wanted a way to better handle moving filament between spool and printer particularly for…
Best printed in PETG or TPU. PLA will work but is too brittle. Suitable for 75mm diameter cans.
Storage containers for only 0.5ml O2vapes all glass cartridges. Helps with odor control and with keeping the vape lasting longer. Print with PLA/PLA+/PETG O-Ring with TPU Recommended to glue O-Ring to cap ONSHAPE LINK Files here to modify…
A clip that can make cereal packets airtight, or any other packet or bag.
