1 / 2
Filament pass through 1-45 mm - Airtight - Filamentdurchführung — zdjęcie 1
1 / 2

Filament pass through 1-45 mm - Airtight - Filamentdurchführung

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

With this component you can simultaneously paas through 4 PTFE tubes airtight. Material thickness from 1 to 45 mm

Ocena
0 / 5
Polubienia
5
Pobrania
49
Wydruki
0
Wyświetlenia
522
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Englisch:

With this filament feedthrough, up to 4 PTFE tubes can be guided simultaneously through a material thickness of 1 mm to 45 mm. The implementation can be airtight. The PTFE hoses should have a diameter of 4mm.

Instructions:

1. Measuring material thickness 
2. Select the “screw_material thickness” file according to the material thickness and download 3. Download “Fastening nut”. 
4. Download “flat nut”.
5. Download “Washer_Disc”.
6. Print everything with PLA or PETG 
7. Decision – airtight or air-permeable version

Airtight version:

WithTPU:

1. Select the “TPU_sealing washer” according to the number of PTFE hose bushings (1 to 4) and download 
2. Download “TPU_sealing washer_screw”. 
3. Print with TPU

Without TPU:

1. Download the objects as described in the TPU instructions. 
2. Get rubber with a material thickness of 1 to 2mm (e.g. old bicycle tube) 
3. Print out the TPU files and use them as a template. Alternatively, you could start cutting based on the dimensions. The holes for the PTFE bushings should be punched with 3.5mm (if too narrow, re-punch with 4mm). 
4. Assemble 
5. done

Air-permeable version:

1. Select the “TPU_sealing washer” according to the number of PTFE hose bushings (1 to 4) and download 
2. Download “TPU_sealing washer_screw”. 
3. Print with PLA or PETG 
4. If necessary, re-drill the holes with 4mm 
5. Assemble 
6. done

 

Deutsch:

Mit dieser Filament-Durchführung können bis zu 4 PTFE-Schläuche gleichzeitig durch eine Materialstärke von 1 mm bis 45 mm geführt werden. 
Die Durchführung kann Luftdicht erfolgen.
Die PTFE-Schläuche sollten 4mm Durchmesser haben.

 

Anwendung:

  1. Messen der Materialstärke
  2. Auswählen der „screw_material thickness“ Datei nach der Materialstärke und downloaden
  3. „Fastening nut“ downloaden
  4. „flat nut“ downloaden
  5. „Washer_Scheibe“ downloaden
  6. Alles mit PLA oder PETG drucken
  7. Entscheidung – Luftdichte oder luftdurchlässige Version

Luftdichte Version:

Mit TPU:

  1. Auswählen der „TPU_sealing washer“ nach der Anzahl der PTFE-Schlauch-Durchführungen (1 bis 4) und download
  2. „TPU_sealing washer_screw“ downloaden 
  3. Mit TPU drucken

Ohne TPU:

  1. Ladet euch wie in der TPU-Anleitung beschrieben die Objekte herunter.
  2. Besorgt euch Gummi in der Materialstärke von 1 bis 2mm (z.B. alter Fahrradschlauch)
  3. Druckt euch die TPU-Dateien aus und verwendet diese als Schablone. Alternativ könntet ihr auch anhand der Abmessungen mit dem Ausschnitt beginnen. Die Löcher für die PTFE-Durchführungen sollten mit 3,5mm gestanzt werden (falls zu eng mit 4mm nachstanzen).
  4. Zusammenbauen 
  5. fertig

Luftdurchlässige Version:

  1. Auswählen der „TPU_sealing washer“ nach der Anzahl der PTFE-Schlauch-Durchführungen (1 bis 4) und downloaden
  2. „TPU_sealing washer_screw“ downloaden 
  3. Mit PLA oder PETG drucken
  4. Eventuell die Löcher mit 4mm nachbohren
  5. Zusammenbauen 
  6. fertig

 

If you have any questions or problems, please write me.

Tagi