1 / 2
Filament pass through 1-45 mm - Airtight - Filamentdurchführung — image 1
1 / 2

Filament pass through 1-45 mm - Airtight - Filamentdurchführung

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

With this component you can simultaneously paas through 4 PTFE tubes airtight. Material thickness from 1 to 45 mm

Rating
0 / 5
Likes
5
Downloads
48
Makes
0
Views
520
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Englisch:

With this filament feedthrough, up to 4 PTFE tubes can be guided simultaneously through a material thickness of 1 mm to 45 mm. The implementation can be airtight. The PTFE hoses should have a diameter of 4mm.

Instructions:

1. Measuring material thickness 
2. Select the “screw_material thickness” file according to the material thickness and download 3. Download “Fastening nut”. 
4. Download “flat nut”.
5. Download “Washer_Disc”.
6. Print everything with PLA or PETG 
7. Decision – airtight or air-permeable version

Airtight version:

WithTPU:

1. Select the “TPU_sealing washer” according to the number of PTFE hose bushings (1 to 4) and download 
2. Download “TPU_sealing washer_screw”. 
3. Print with TPU

Without TPU:

1. Download the objects as described in the TPU instructions. 
2. Get rubber with a material thickness of 1 to 2mm (e.g. old bicycle tube) 
3. Print out the TPU files and use them as a template. Alternatively, you could start cutting based on the dimensions. The holes for the PTFE bushings should be punched with 3.5mm (if too narrow, re-punch with 4mm). 
4. Assemble 
5. done

Air-permeable version:

1. Select the “TPU_sealing washer” according to the number of PTFE hose bushings (1 to 4) and download 
2. Download “TPU_sealing washer_screw”. 
3. Print with PLA or PETG 
4. If necessary, re-drill the holes with 4mm 
5. Assemble 
6. done

 

Deutsch:

Mit dieser Filament-Durchführung können bis zu 4 PTFE-Schläuche gleichzeitig durch eine Materialstärke von 1 mm bis 45 mm geführt werden. 
Die Durchführung kann Luftdicht erfolgen.
Die PTFE-Schläuche sollten 4mm Durchmesser haben.

 

Anwendung:

  1. Messen der Materialstärke
  2. Auswählen der „screw_material thickness“ Datei nach der Materialstärke und downloaden
  3. „Fastening nut“ downloaden
  4. „flat nut“ downloaden
  5. „Washer_Scheibe“ downloaden
  6. Alles mit PLA oder PETG drucken
  7. Entscheidung – Luftdichte oder luftdurchlässige Version

Luftdichte Version:

Mit TPU:

  1. Auswählen der „TPU_sealing washer“ nach der Anzahl der PTFE-Schlauch-Durchführungen (1 bis 4) und download
  2. „TPU_sealing washer_screw“ downloaden 
  3. Mit TPU drucken

Ohne TPU:

  1. Ladet euch wie in der TPU-Anleitung beschrieben die Objekte herunter.
  2. Besorgt euch Gummi in der Materialstärke von 1 bis 2mm (z.B. alter Fahrradschlauch)
  3. Druckt euch die TPU-Dateien aus und verwendet diese als Schablone. Alternativ könntet ihr auch anhand der Abmessungen mit dem Ausschnitt beginnen. Die Löcher für die PTFE-Durchführungen sollten mit 3,5mm gestanzt werden (falls zu eng mit 4mm nachstanzen).
  4. Zusammenbauen 
  5. fertig

Luftdurchlässige Version:

  1. Auswählen der „TPU_sealing washer“ nach der Anzahl der PTFE-Schlauch-Durchführungen (1 bis 4) und downloaden
  2. „TPU_sealing washer_screw“ downloaden 
  3. Mit PLA oder PETG drucken
  4. Eventuell die Löcher mit 4mm nachbohren
  5. Zusammenbauen 
  6. fertig

 

If you have any questions or problems, please write me.

Tags