Airtight Coffee Bean Container (1000 grams) with spout

I really enjoy drinking a lot of coffee. Since I don't like dealing with all the fuss of coffee preparation, I was always bothered by the hassle of correctly opening and airtight resealing the packaging. The coffee container from Trudslev convinced me, especially because you can customize it to the desired size. I usually buy the beans in 1 kg packages. 

What was missing was an easy way to pour the coffee beans from the container into the coffee machine. This is now possible with my model.

I leave it up to you to determine the extent to which the container needs to be airtight. The author of the original model recommends printing the container with 5 perimeters, resulting in a 0.4mm nozzle producing a solid wall thickness of 4mm. I printed my container with a 0.6mm nozzle and 2 perimeters, resulting in a solid wall thickness of 2.4mm. With a 0.4mm nozzle, you would need 3 perimeters. I consider this to be sufficient.
Additionally, the author recommends attaching a piece of TPU filament to the recess of the container. I can imagine that this increases airtightness, but I chose not to do so in my model. You are welcome to do that with your model; the recess in the container is available. There's also another one in the lid to seal it against the spout.

Printing information

The STL files are correctly aligned.

Layer height: 0.2mm
Infill: 10%
Support: none
Brim: recommended for spout.stl

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.