1 / 5
Airtight Filament PTFE Tube Cap 4 mm OD v2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airtight cap for 4mm PTFE filament tube w/ optional o-ring
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 642
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (32)Powiązane
This is an improved version of Bu66as's filament tube cap https://www.prusaprinters.org/prints/70444-petg-tube-cap-for-ptfe-4-mm-od
I used the original model as a starting point and redesigned it with these improvements:
- Optional o-ring slot for better seal (¼inch OD, ⅛inch ID / 6.35mm, 3.175mm)
- spring based attachment loop which grabs on to the filament tube
- allow more filament to hang out of the tube
I've had success printing it in PETG @ .2mm with 4-6 perimeters (to avoid infill)