1 / 4
LEGO Ferrari F1 42207 Wall Mount - Horizontal — zdjęcie 1
1 / 4

LEGO Ferrari F1 42207 Wall Mount - Horizontal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Horizontal Wall mount for the LEGO Technic F1 Ferrari

Ocena
0 / 5
Polubienia
8
Pobrania
197
Wydruki
0
Wyświetlenia
1013
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Horizontal wall mount for the Lego F1 Ferrari car 42207. Recommended to be printed as shown to help keep the layers in the strongest orientation. Can be mounted so that the nose faces left or right, see highlighted locations in the photo for each orientation.

There is one stl file with the F1 logo imprinted on the face, another without the logo imprinted. It's set back only 0.2mm, but can still be easily seen once printed. 

Recommend 3+ perimeters and 30%+ infill. I use 0.4mm nozzle with 0.2mm layers. My personal preference on infill is cubic. I used PLA.

The bolt holes are 4.5mm diameter for the screw and 9mm diameter for the screw head. Sunken 3mm. This fits a #8 screw very well - not sure what the equivalent metric is.

Always use the proper anchor for what you are mounting to.

Tagi