LEGO Ferrari F1 42207 Wall Mount - Horizontal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Horizontal Wall mount for the LEGO Technic F1 Ferrari
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 205
- Makes
- 0
- Views
- 1,039
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
Horizontal wall mount for the Lego F1 Ferrari car 42207. Recommended to be printed as shown to help keep the layers in the strongest orientation. Can be mounted so that the nose faces left or right, see highlighted locations in the photo for each orientation.
There is one stl file with the F1 logo imprinted on the face, another without the logo imprinted. It's set back only 0.2mm, but can still be easily seen once printed.
Recommend 3+ perimeters and 30%+ infill. I use 0.4mm nozzle with 0.2mm layers. My personal preference on infill is cubic. I used PLA.
The bolt holes are 4.5mm diameter for the screw and 9mm diameter for the screw head. Sunken 3mm. This fits a #8 screw very well - not sure what the equivalent metric is.
Always use the proper anchor for what you are mounting to.