Counting matching models…
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
I wanted a horizontal mount for the SKR Mini E3 V2 to act as a secondary MCU for Tronxy X5SA Pro build. It needed to be in the front right side so it could be hooked to a display. Printed in PLA using Voron print specifications. Supports…
3 slots organizer for baking powder. The holes allows you to grab the powder easily. Internal dimensions of the slots are : 70mm by 100mm. Dimensions of the whole organizer : 106mm by 220mm. Height : 55mm
it is a new version of horizontal filament holder that will fit into low spaces, thanks to the 10mm metal balls (from 30 to 50 pieces), the whole thing runs smoothly like on bearings. ATTENTION TPU/FLEX elements are not required, but we…
This is a bracket for a 3/4 inch French cleat system. Autodesk files included and parameterized for other cleat sizes.
Pen Slide, an almost horizontal pen/pencil storage shelf that fits under my monitor for keeping pens & pencils etc. organized. Enough slope that the ends are slightly elevated for easier selection. No supports needed. Maintain R/L leg…
Build a professional protective frame for your Raspberry Pi 4 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant provides an optimal viewing angle without top-side cutout. Here we offer you the STL files for…
Build a professional protective frame for your Raspberry Pi 5 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant without top-side cutout. Here we offer you the STL files for 3D-printed housing parts,…
Build a professional protective frame for your Raspberry Pi 5 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant with top-side cutout for camera/connector access. Here we offer you the STL files for 3D-printed…
This is a calibration Test to set up the calibration parameters. The Ruler must be 90mm x 32mm exactly printed. And the holes are: A=20mm B=15mm C=10mm The process is more or less straight forward: Print with Ultimaker Cura Measure with a…
More compact version of the excellent design by borgej I remixed to fit better in the space I have.
There are many holders for storing spray cans vertically. I wanted to install my fire extinguishing spray under the cellar stairs, where it only fits horizontally. I couldn't find anything for this. Here is my solution. For spray cans,…
Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro. It also fits my iPhone 16e. The brackets can hold a phone, with or without a case, up to 13.75mm thick and 149 mm tall. While I was…
Build a professional protective frame for your Raspberry Pi 4 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant with top-side cutout for camera/connector access. Here we offer you the STL files for 3D-printed…
With the help of the components for the Raspberry Pi 5" Touch Display 2 Frame Horizontal you can install the new Touch Display 2 from the Raspberry Pi Foundation in a picture frame-like housing. This version is made for the RaspberryPi 4.…
A week ago, I started working for a new employer and, to my surprise, I received a company phone – an iPhone 16. Since its use is limited to confirming logins to company systems, I thought it would be a good idea to have it on my computer…
Gridfinity compatible bin which can hold 3x 22650 batteries
Gridfinity compatible bin which can hold 3x 26650 batteries
Este soporte central es una pieza estructural clave dentro del mecanismo ocular del animatrónico. En su sección media integra dos orejetas paralelas que funcionan como punto de pivote para la rotación del conjunto de ojos, permitiendo el…
My top glass was removed from the printer and was lying around. It was only a matter of time before it broke accidentally. So I made a simple holder with horizontal glass loading. It attaches to the stock holes, requiring four M3x10…
Wall mounted horizontal holder for x20V team Parkside batteries. Tested on PET-G. Can hold a 8Ah Smart version, not sure about 12Ah version. No supports needed.
Standing Build Plate Holder for 5 plates. You can mount it either horizontally or veplate holderrtically, printing one or two supports. I created two versions: - completely smooth for gluing with glue or double-sided tape - with holes for…
hello i used your model because i only needed a simplified pressure thank you for the wonderful drawing. i cut out your
Minimalistic chopstick holder! Super sleek design and looks great! Holds your chopsticks horizontally.
This is the digital version of my backpack clip for the new Garmin Inreach Mini 3. It'll hold the Garmin on any horizontal strap that is max. 2mm thick and 45mm high. 3D Print on it's side and secure the clip to the Garmin with a M3x8mm…
This 3d printed napkin holder (suitable for folded McDonalds napkins) is perfect for sitting on the desk, or... anywhere! (Note: Print this at your own risk, my 3d printer broke so I have no way of testing it.)
This model is compatible with the lego system.
couldn't find a plant holder for holding cuttings were there is a little more stem making it difficult to put it in the water and prevent stem rot .this holder holds both sides of the stem preventing root rot Category: Hobby
While printing the original for a friend, I was struggling with getting the rods to print as well as I'd like. Printing them vertically made them look nice, but the prints took a very long time and were prone to bed adhesions issues.…
Voron print settings. Follow original model instructions. Stock 2020 will strike the endstop (ziptie in picture used for smaller x extrusion)
3D printable Insta 360 horizontal mount. You will need a 1/4 inch screw of some kind to hold the camera in place.
Two versions: on for medium sized clamps and the other for mini hobby clamps. I designed this to compactly store my clamps horizontally as I had space on my pegboard to place them there. I really like how they are both easily accessible…
Single horizontal badge holder with dual hanging holes. I needed an option with two hanging holes to accommodate the camera strap I use to hold my work ID badge. One quick remix later, and here we are. Print with supports so the overhangs…
This is a custom pin designed for the Crocheting Board with Grid Template. The original vertical pins can sometimes snap along the layer lines when under tension. I redesigned this pin to be printed horizontally (lying flat) . This…
This wall mount design enables a 2kg fire extinguisher (~110mm diameter) to be mounted horizontally, ideal for fitting high up the wall of a van to minimize impact to internal space and ensure accessibility even when the van is heavily…
📐 The Ultimate Level Storage Solution Standard pegboard hooks never line up with the holes in a level—especially on extra-long 48" or 72" levels. This Universal Horizontal Level Pegboard Mount solves that by supporting the level from the…
A simple, Open-Source, nightingale geometry magazine. What can I even say, it's what's on the tin. Much like the ParaTalon , this was made as I wasn't satisfied with any printable magazine design I found. I wanted something simple,…
I have a few use cases where generic Gridfinity bins aren't the best option, I didn't want to print a custom bin, and I wanted something that I could quickly modify for what I need to store at the time. As I worked on it I realised I…
Small Horizontal Wireless Charger with Apple Watch to Basues Magsafe
Horizontal Display Stand for LEGO® Harry Potter™ 76444 (Diagon Alley) This is a custom horizontal display stand made for LEGO® Harry Potter™ 76444 (Diagon Alley) . The original build is almost 1 meter long , so it’s hard to display unless…
Bracket that holds 4x3 vinyl downspout. Remixed version for larger downspout.
A simple mount for digital calipers to be stored horizontally. There are two hexes to print: One at the LCD screen, and another at the end. You'll need to print both as they hold on to the caliper at different heights to ensure it's…
My (żaluzje) blinds holder (one of 2) broke so I recreate the working one on tinkercad. 2 photos of my print, 2 photos of the working holder and a single photo of broken one. Model is recreating "V10" 19x25mm horizontal blinds Space…
Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro that I always had either the Imperial Cog, Rebel Alliance, or SpaceX case with built in two credit card holder that I designed (see…
Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro that I always had either the Imperial Cog , Rebel Alliance , or SpaceX case with built in three credit card holder that I designed.…
This is a simple mount for securing the male end of an XT60 connection. Use a separate strap to hold the connection when fitting with the female end. The size will depend on your wire. Printed with PETG, 30% infill, no supports.
This mount enables secure attachment of a Büchel rear light to an Ergon bicycle saddle. It is screwed onto the two metal saddle rails. The holder is designed for a rail spacing of 41.9 mm (center to center). The rear light is secured via…
I couldnt find a poop bag holder that holds full rolls and dispenses them horizontally. This will hold 6 standard size rolls and they will roll out as you use them. I installed it under our front entrance bench to have them ready to swap…
A unique 3D printable creation — this T-Bar Bracelet Display Stand, Horizontal Bar, Holds Bangles And Bracelets Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
It's my very first project. (please be gentle) :-) I tried to change the original with 'tinker cad' online For the settings I used : - Wall loops : 5 - Sparse infill pattern : Honeycomb - Enabled Support : YES Style : Snug
I took the 4040‑extrusion screw‑mount section from the Ender 3 Pro Y/Z tensioner and merged it with the anti‑crossthreading horizontal‑printing screw mechanism from Thompson Studios’ remix. The 4040 screw hole and mounting geometry were…
THIS IS MY DESIGN PORTED FROM THINGIVERSE This design was created in 2018. I was not so experianced as I am today. Now I don't consider this to be a good spool holder. Keep that in mind. Just a simply horizontal spool holder. I needed…
I found three useful designs and merged them to become a 4 bearing horizontal spool holder with a quick release spool hub. The hub is detachable from the base for ease of loading on a new spool. The design uses 4 off 608 bearings and the…
A quick mod to the micron's z-chain mount, changing from vertical to horizontal. The bottom of the chain is simply mounted to the 1515 bed mount.
Straight Talon DRUM SPRING Mag [ 12 / 17 / 20 short darts ] --> for DRUM SPRING --> Horizontal Print --> shorter, rectangular feed lips to be compatible with more blasters (e.g. ONTOS and MULTI-TOOL) Since my MULTI-TOOL and ONTOS don't…
🔹 Description A clean and simple horizontal phone holder designed for everyday use. This model prints easily and provides a stable viewing angle for watching videos, scrolling, or keeping your phone visible on your desk. Some supports are…
lubrification system for horizontal bandsaw one in 3d print and the other can be made by machining
Sonos Roam 2 – Horizontal Wall Mount (3D Printed) Keep your sound crisp, clean, and perfectly positioned with this custom‑designed horizontal wall mount for the Sonos Roam 2 speaker . Built for both style and practicality, this mount…
DESCRIPTION TL;DR A quick print to help you position the Play modem horizontally. Key Features low filament usage sturdy design allows to attach fan, external drive or cable managment using heatinserts MAKING Requirements This is an easy…
Print-in-Place Hinge for small Multifunction Arm System (not lockable) A hinge for the Multifunction Arm by RostaP which connects two elements e.g. to rotate tablets horizontally up to 100 degrees. May work with regular Multifunction Arm…
💡Why? I have found that I have an affinity to using macros for efficiency and productivity. My solution for my unsatiable need was a macro pad. I have had macro pads in the past such as a repurposed USB numpad, DIY Adafruit and keyboard…
Mounts a BTT SFS 2.0 on a vertical (or horizontal) 2020 rail, and still allows panel removal. The sensor feeds filament perpendicular to the mounting rail
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. Long ago (Few years ago) I posted a model for a toothbrush stand here in Printables. Now comes the second edition, which is a horizontal holder…
Print the body and the lid. Then just snap the lid on after insert the steel ball (I used 5.556mm diameter) and the PCB of micro switch. No need for screws.
Use the T-clips system from @LineArcLine here: https://www.printables.com/model/256896-skadis-t-clip-system Two T-clips needed. Print on the side, with brim, and go slower (especially on bedslinger), no supports needed.
Horizontal slat railings are a common feature on many terraces and decks, yet their design often leaves little room for traditional hanging decorations. This project aims to turn that unused space into a functional asset. I have developed…
I needed some 'feet' in horizontal direction, in order to space some hanging cabinets from the wall. I found the following design by VC Design fitting exactly my needs: However, I needed them to be horizontal instead of vertical. So I…
This model is compatible with the lego system.
This model is compatible with the lego system.
I remixed this so it would work with my weird work ID. It is a horizontal ID but the barcode swipes on the short edge vertically so not many badge holders fit it. I kept it snug for my ID card's fit and it does not slide out on its own.…
Printed in PETGCF have been using it without issue. Plate adds way more rigidity than I anticipated, so its overbuilt. New to designing in 3D, model may be horribly optimized. I really have no idea what I'm doing.
Used to hold a guitar that is oriented horizontally. You will need to drill holes for screws as well as get another guitar hanger to hold the body as seen in pictures.
Horizontal remix of https://www.printables.com/model/1687024-id-holder-v2-only-7-grams
I updated this with slightly thicker walls, and beefed up the bottom wall. It was quite weak do to the holes and thin bottom. Print the case in PET-G for toughness. The stand folds with plastic hinges, so they last for a while but not…
Angled (22.5 degrees) and horizontal foregrips. Left handed? No problem!
A clamp to mount 50 mL tubes to an orbital shaker. The tube fits snugly in the bottom clamp, the cap sinks into a divot so the rim is prevented from moving while the shaker is in motion. The top clamp clips around the back of the bottom…
A clamp to mount 50 mL tubes to an orbital shaker. The tube fits snugly in the bottom clamp, the cap sinks into a divot so the rim is prevented from moving while the shaker is in motion. The bottom clamp screws into the shaker platform…
I made an ideal holder for phones… Sometimes when I eat someting… I watch youtube videos… and I searched a good but simple holder… I didn't find the best so I made it.. Now this is the verion 2.. In the future i wanna upgrade it.. Have a…
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
This is a parametrized horizontal motor base. It was designed to hold the motor for a "Motorised siren brushless 450" ( http://www.thingiverse.com/thing:59580 ). It can nevertheless be used for other purposes. Within the SCAD file,…
Horizontal Lamp Designed for red light therapy lamp MITO LIGHT Bulb 3.0 ( https://www.mitolight.cz/mito-light-bulb-3-0/ ). can be used for any bulb with a 4cm socket. You can support me with Bitcoin or Lightning network HERE or normal…
I tried to use @kulfurst Nintendo Switch Horizontal Flip Dock , but found that it doesn't fit the Ethernet version of the dock that is included with the OLED Switch. I redesigned the stand to fit the Ethernet dock from scratch, but…
I made this stand to be a more convenient location to store my wife's Elvie pumps for charging. Charging ports face up to easily plug in cables. Note that this design is for the Elvie Pump, and NOT the Elvie Stride. I printed this on my…
A horizontal knife stand, to prevent them rattling in the drawer and losing their edge, and also making them easier to grab. The standard version fits most small-medium knives, but with the larger ones the blade sticks out, so you know,…
Hello, I would like to present my version of the dry box. I was inspired by this model: Link to the model In all the boxes I've seen so far, the spools are upright. This bothered me a lot, so I came up with a horizontal variant. The box…
Horizontal blinds controller - no more hanging chains on windows. To open the blind, just turn the controller. To connect both parts just insert a piece of filament. You can choose two designs of rotate part. The static part is the same.…
a horizontal drag chain mount for the ebb36 on a xol toolhead
Horizontal adapter for Meanwell UHP-500-24 mounted on Meanwell DRP-03 adapter on din rail. Used on Voron 2.4
This model lets you stand the G2 engraver on top of the power-unit. Print the model 2x and slide them over the power-unit. The fans have 20mm clearance to the desk. You can use the holes in the feet for a ty-wrap or string to clamp the…
A minimal and horizontal built baseball bat holder. Consists of a support for the handle and for the barrel for a 2 5/8" bat. The design was based around a Louisville Slugger wood bat. The design includes countersink for two drywall…
perfectly fitten horizontally speaker holder for the z533 from logitech Print Settings Printer Brand: Creality Printer: Ender 3 Category: Audio
Cable clip for ikea skadis boards. For 8mm wide flat cables. Printed with supports
